Overview
The Pro Comp Suspension EXP55708B is an adjustable front track bar for the 2018 to 2026 Jeep Wrangler JL. It replaces the stock front track bar and is intended to re-center the front axle after a lift is installed.
The design gives maximum clearance between steering components. Installation is bolt-in, using the factory mounts.
Key features
- Replaces the stock front track bar on the JL
- Adjustable length to re-center the front axle after lift installation
- Bolt-in installation using the factory mounts
Re-centering after a lift
The track bar keeps the front axle centered side to side. When the body is raised, the stock bar can leave the axle off center, which affects steering feel and tire wear. An adjustable bar lets the length be changed so the axle sits back in the middle of its travel once the suspension is raised.
Bolt-in installation keeps the job simple, since the factory mounts are reused. Check the ball joints and bushings at each service, and look for torn boots or play at the ends. A loose or worn track bar can make the steering feel vague, so replace worn ends early.
- Re-check axle centering after the lift is installed
- Inspect track bar ends for torn boots
- Check the factory mounts for cracks or wear
- Align the front end after any length change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP55708B |
| Position | Front |
Vehicle fitment
It fits the 2018 to 2026 Jeep Wrangler (JL) in two-door and four-door models, including the Unlimited.
It is for the JL generation only; match the year, model and trim to your vehicle first.
What’s included
The adjustable front track bar under part number EXP55708B.







