Select your vehicle

Rancho 2.5 Inch Primary Lift Kit with RS9000XL Shocks – RS66901R9

Rancho

Check today’s price on Amazon

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS66901R9 2.5-inch primary lift kit with RS9000XL shocks
  • Upper control arms, ball joints and rear lift blocks
  • Fits 2005 to 2013 Toyota Tacoma

Description

Overview

The Rancho 2.5-inch Primary Lift Kit with RS9000XL Shocks, part number RS66901R9, is a coilover lift for 2005 to 2013 Toyota Tacoma trucks. It lifts the vehicle 2.5 inches and includes RS9000XL series shocks.

The kit maintains OE alignment, so factory alignment settings are kept as close as possible after the lift. The kit does not affect the electronic stability control system.

Upper control arms and ball joints set the front geometry at the 2.5-inch lift. The kit maintains OE alignment, keeping factory alignment settings as close as possible after the lift.

The rear uses lift blocks and a U-bolt kit, and RS9000XL series shocks are included with the system. The kit does not affect the electronic stability control system.

Key features

  • 2.5-inch lift
  • RS9000XL series shocks included
  • Upper control arms
  • Ball joints
  • Rear lift blocks and U-bolt kit
  • Maintains OE alignment

Coilover lift considerations

Coilover systems combine the spring and shock into one unit, so the shock and spring work together at the front. When a coilover is installed, shock length and damping are matched to the new height, which helps the suspension keep its travel. Upper control arms and ball joints are often replaced along with the coilover setup.

Because the kit is set up to keep alignment close to factory settings, alignment should still be checked after any front work. Inspect the bump stops and rear lift blocks for proper seating, and look for wear in the U-bolts after the first trail runs. Tires and suspension in good condition support stability control at its best.

  • Check alignment after installation
  • Inspect ball joints for play
  • Tighten U-bolts after the first drive
  • Replace worn bump stops

Specifications

Brand Rancho
Part number RS66901R9
UPC 39703004039
Lift height 2.5 inches
Suspension type Coilover
Rear lift method Lift blocks and U-bolts
Shocks RS9000XL series, included
Electronic stability control Not affected by the kit

Vehicle fitment

It fits 2005 to 2013 Toyota Tacoma models.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

RS9000XL series shocks, upper control arms, ball joints, rear lift blocks and a U-bolt kit.

SKU: RANRS66901R9 Category:

Specification

Shipping weight 90.30 lbs
Package dimensions 31.00 × 13.00 × 9.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2013Base, Pre Runner, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RS66901R9 fit a 2010 Toyota Tacoma?

Yes. It fits 2005 to 2013 Toyota Tacoma models, which includes 2010. Confirm fit for your vehicle's year, model and trim before installing the kit.

Are the shocks included?

Yes. RS9000XL series shocks are included with the kit as part of the 2.5-inch primary lift package. The upper control arms, ball joints and rear lift blocks are supplied with them.

Will the RS66901R9 affect stability control?

The kit does not affect the electronic stability control system. It also maintains OE alignment, so factory alignment settings are kept as close as possible after the 2.5-inch lift.

How often should coilover and upper control arm parts be inspected?

Inspect them after the first few trail runs and then during regular service. Look for leaks at the shock body, cracked bushings and play in the ball joints. Replace worn parts before they affect steering or alignment.

Find it on Amazon

See today’s price and delivery options on Amazon, and check out with your Amazon account.

Check today’s price on Amazon