Select your vehicle

Fabtech 3″ Spacer System with Dirt Logic 2.25 Shocks – K4101DL

Fabtech

Shop Jeep Wrangler JL Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3 inch spacer system with Dirt Logic 2.25 non-reservoir shocks
  • For 2018 Jeep Wrangler JL Unlimited four door, 3.6L V6
  • Retains the factory roll center at the higher height

Description

Overview

The Fabtech K4101DL is a 3 inch spacer system with Dirt Logic 2.25 non-reservoir shocks for the 2018 Jeep Wrangler JL Unlimited four-door, with the 3.6L V6 engine. The spacers lift the vehicle while the factory coil springs stay in place.

It is an entry level system for owners who want clearance for oversized tires while keeping the factory ride quality. It covers the front and rear coil spring spacers, bump stop extensions and sway bar links needed for the lift.

Key features

  • Dirt Logic 2.25 non-reservoir shocks included
  • Steel front and billet rear coil spring spacers
  • Four bump stop extensions that limit travel within factory specifications
  • Extended front and rear sway bar links with urethane bushings
  • Heavy duty rear track bar bracket
  • Standard fenders take 35 inch tires with minor trimming

Choosing a shock setup

The shock choice shapes how a spacer lift feels on rough ground. Non-reservoir shocks keep the body compact, which suits owners who want a simple, direct setup. Remote reservoir designs add a separate canister for extra fluid capacity, which helps with heat during long off road runs but takes more room to mount. Either way, the shock length should match the new ride height so travel is not used up too early.

Spacers hold the factory coil springs in place, so the spring rate stays the same as stock. That makes the truck feel familiar on pavement. Bump stop extensions and sway bar links help control travel and keep the suspension geometry in range. Inspect bushings and bump stops after rough trails and replace any that are split or flattened.

Specifications

Brand Fabtech
Part number K4101DL
UPC 700008517321
Lift height range 2 to 3 inches
Engine 3.6L V6
Front shocks Dirt Logic 2.25 non-reservoir
Front spacer Steel
Rear spacer Billet

This version uses the non-reservoir Dirt Logic 2.25 shock, one of four shock choices for this spacer system.

The extended sway bar links and the rear track bar bracket keep the suspension within the factory operating planes, and the bump stop extensions control travel within factory specifications.

The lift height range for this system is 2 to 3 inches.

The kit includes Dirt Logic 2.25 non-reservoir shocks.

Vehicle fitment

It covers the 2018 Jeep Wrangler JL Unlimited four-door models across the Unlimited trim levels. Two-door JL models are not included.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Standard fenders need minor trimming for 35 inch tires. High clearance fenders are needed for 37 inch tires, which need cutting for installation.

What’s included

Included: Dirt Logic 2.25 non-reservoir shocks, front and rear coil spring spacers, four bump stop extensions, sway bar links and the rear track bar bracket.

SKU: FABK4101DL Category:

Specification

Shipping weight 78.40 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JL)2018Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K4101DL fit a 2018 Jeep Wrangler JL Unlimited?

Yes. It fits the 2018 Jeep Wrangler JL Unlimited four-door models with the 3.6L V6. Confirm your year, model and trim before ordering.

What shocks come with the K4101DL?

It comes with Dirt Logic 2.25 non-reservoir shocks, which are the front shocks for this version of the system. Those shocks come in the kit itself. Confirm your vehicle's year, model and trim before ordering.

Does this spacer system keep the factory coil springs?

Yes. The steel and billet spacers sit with the factory coil springs, so the stock springs stay in use while the vehicle is raised 2 to 3 inches.

Can a 3 inch spacer kit be combined with new shocks later?

Yes, and it is often a good time to do so. Replacing worn shocks alongside the spacers keeps the ride consistent with the new height. Choose shocks sized for the finished ride height.

What should be inspected after installing a spacer lift?

Check the bump stops, sway bar links, track bar bracket and brake lines for clearance. Look for rubbing at the tires, and recheck torque on all fasteners after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Lift Kits on Amazon