Overview
The Pro Comp K4137BP is a 6-inch Stage 1 lift kit with Pro Runner shocks for the 2004–2008 Ford F-150 and the 2004 F-150 Heritage. It uses front crossmembers, compression struts and spindles with a steering drop centerlink, and a rear block and U-bolt kit.
This is the same front and rear hardware as the K4137B, with the shock package named as Pro Runner. The compression struts control the front arm angles, and the crossmembers and spindles establish the new front height. Front sway bar spacers keep the bar working at the raised height.
Key features
- 6-inch lift height
- Front and rear crossmembers
- Compression struts
- Spindles and steering drop centerlink
- Front sway bar spacers
- Brake line extension brackets for the lifted front end
Shock choice after a 6-inch lift
Shock valving decides how the lifted truck settles over washboard roads and rough dirt, and it should match how the truck is driven. Shocks built for the new height keep the springs from bouncing and help the tires stay in contact with the ground. The right choice depends on the load, the tire size and how much time is spent off pavement.
When a shock is replaced, look at the mounting hardware and bushings at both ends. Worn eyelets, cracked bushings or a leaking body usually mean the unit is past its useful life. Replace shocks in pairs on the same axle so the truck does not pull to one side or sit at an odd angle.
Front arm angles change with a crossmember-based lift, so the compression struts and their bushings should be checked whenever the shocks are swapped. Re-check the sway bar spacers and brake hose brackets at the same visit, since they are part of the same front setup.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4137BP |
| UPC | 70000637843 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmembers, compression struts and spindles |
| Steering correction | Steering drop and centerlink |
| Rear lift | Block and U-bolt kit |
| Shocks | Pro Runner (named in product title) |
Vehicle fitment
This kit fits the 2004–2008 Ford F-150, in the FX4, Harley-Davidson Edition, King Ranch, Lariat, STX, XL and XLT versions, and the 2004 F-150 Heritage in XL and XLT versions.
Only the 2004 through 2008 F-150 years and the 2004 Heritage are covered, so the 2009 and newer trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift changes the front suspension geometry, so schedule an alignment after the work is done and check the brake hoses at full travel.
What’s included
The kit includes front and rear crossmembers, compression struts, spindles, the steering drop centerlink, front sway bar spacers, brake line extension brackets, and the rear block and U-bolt kit, with Pro Runner shocks.









