Select your vehicle

Pro Comp 6 Inch Lift Kit with Front MX2.75 Coilovers and Pro Runner Shocks – K5066BPX

Pro Comp Suspension

Shop Toyota Tacoma Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • The 6-inch Stage 2 kit fits the 2005–2008 Toyota Tacoma Base and Pre Runner.
  • Front MX2.75 coilovers with crossmembers, compression struts and steering knuckles
  • Front sway bar spacers, bump stop extensions and brake line extension brackets
  • Rear block and U-bolt kit with add-a-leafs and Pro Runner shocks

Description

Overview

The Pro Comp K5066BPX is a 6-inch Stage 2 lift kit with front MX2.75 coilovers and Pro Runner shocks for the 2005–2008 Toyota Tacoma. It is a knuckle-type front lift with crossmembers and compression struts, and the rear uses a block and U-bolt kit with add-a-leafs.

This version uses MX2.75 coilovers at the front. The steering correction is brake line extension brackets, and front sway bar spacers and bump stop extensions are included.

Key features

  • 6-inch lift height, Stage 2
  • Front MX2.75 coilovers
  • Front and rear crossmembers
  • Compression struts and steering knuckles
  • Front sway bar spacers and bump stop extensions
  • Rear block and U-bolt kit with add-a-leafs

Coilover setup on a Tacoma

Coilovers combine the spring and damper into one unit, which makes ride height and damping easier to set than with separate parts. Front coilovers on a lifted truck put more load on the upper mounts and lower shock bracket, so those mounts deserve a look at each service. Ride quality depends on matching the spring rate to the truck’s weight and how it is loaded.

Coilover setups often pair with extended sway bar links and longer brake lines, because the front suspension moves through a different arc. Check that the coilover body clears the steering components and frame at full compression and full droop. Start with a moderate damping setting and adjust in small steps after several drives.

Signs of a worn coilover include oil residue on the body, a bouncy ride after bumps, clunks at the top mount and uneven tire wear. Rebuilding or replacing a damaged coilover is often more practical than repairing it, and bump stops should be inspected at the same time.

  • Inspect upper mounts for play
  • Check clearance at full compression
  • Re-check alignment after coilover changes
  • Look for oil on the shock body

Specifications

Brand Pro Comp Suspension
Part number K5066BPX
UPC 70000637868
Lift height 6 inch (lift height range 5 to 6.99 inches)
Lift kit stage Stage 2
Suspension type Knuckle
Front control Front and rear crossmembers, compression struts and steering knuckles
Steering correction Brake line extension brackets
Rear lift Lift blocks and U-bolts with add-a-leafs
Front shocks MX2.75
Rear shocks Pro Runner (named in product title)

Vehicle fitment

It fits 2005–2008 Toyota Tacoma Base and Pre Runner models.

Only the 2005 through 2008 Tacoma model years are included. The 2004 and earlier trucks and the 2009 and later generations are outside this entry. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Coilovers on the front change the spring and damper setup, so the alignment should be checked after the coilovers are installed and the brake lines inspected for clearance.

What’s included

The kit includes the front MX2.75 coilovers, front and rear crossmembers, compression struts, steering knuckles, front sway bar spacers, bump stop extensions, brake line extension brackets, and the rear block and U-bolt kit with add-a-leafs.

SKU: EXPK5066BPX Category:

Specification

Shipping weight 276.95 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2008Base, Pre Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K5066BPX fit a 2005 Tacoma?

Yes. The kit fits the 2005 through 2008 Toyota Tacoma in the Base and Pre Runner versions, so a 2005 truck is inside the covered years.

What front shock does this kit use?

The front shock is the MX2.75 coilover. The rear uses Pro Runner shocks, and the rear hardware is a block and U-bolt kit with add-a-leafs.

Is this kit the Stage 2 version?

Yes. The kit is Stage 2, and it adds MX2.75 coilovers to the Stage 2 front package, with crossmembers, knuckles and compression struts.

Can front coilovers be rebuilt or adjusted?

Many coilovers can be serviced, and some offer damping adjustment that lets you tune firmness. Check seal and shaft condition at each service, and have the unit rebuilt rather than replaced if damage is limited to seals.

How do you tell front coilovers are wearing out?

Common signs are oil on the shock body, a loose or bouncy ride, knocking at the top mount and uneven tire wear. Any of these means the coilover should be inspected before the next long trip.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Lift Kits on Amazon