Overview
The Pro Comp K5073M is a 6-inch stage 1 lift kit with rear PRO-M shocks for the 2005–2011 Toyota Tacoma. The lift height range is 6 to 7 inches, and the rear shock is included.
The rear uses an Add-A-Leaf lift method and components. It is built for the Base, Pre Runner and X-Runner versions in the 2005–2011 model years, which make up the first part of the second-generation Tacoma. 2012–2015 trucks from that generation fall outside its fit.
Key features
- 6-inch stage 1 lift for the 2005–2011 Tacoma
- Rear PRO-M shocks, included
- Add-A-Leaf rear lift method
- Lift height range of 6 to 7 inches
Add-A-Leaf rear springs
An Add-A-Leaf kit adds a leaf to the rear spring pack, which raises the rear and changes how the spring carries load. The added leaf stiffens the rear, so ride quality and loaded behavior shift compared with stock. Leaf packs and their clips can wear over time, and a lift is a good point to inspect them.
Check the spring eyes, shackles and bushings for play, and look at the U-bolts that secure the pack to the axle. Cracked leaves or broken clips show up as sagging or uneven stance. Keep an eye on rear tire wear, since a spring change alters the axle’s angle under the truck.
- Inspect the leaf pack for cracks and broken clips
- Check spring eye bushings and shackles
- Watch for uneven rear tire wear
- Retighten U-bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5073M |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Rear shocks | PRO-M, included |
| Rear lift method | Add-A-Leaf |
| Shocks included | Yes |
Vehicle fitment
It fits the 2005–2011 Toyota Tacoma Base, Pre Runner and X-Runner versions.
The kit is not recommended for standard cab or extended cab 4-cylinder models. Fit is set for 2005–2011 Tacoma models, and the 2012 and newer Tacoma and the 4Runner fall outside that range. Verify the year, model and trim against your truck before ordering.
Installation notes
Because the rear lift is an Add-A-Leaf design, check the rear suspension and the driveline angles after installation, and confirm the cab and engine configuration matches what the kit is meant for. Take the time to check the cab and engine before buying, since Pro Comp does not recommend the kit for some of them.
What’s included
Rear PRO-M shocks, and the Add-A-Leaf rear lift components.













