Overview
The Rough Country 6-inch Ford suspension lift kit, part number R/C58730, fits the 2021–2026 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL and XLT versions. It is an all-inclusive kit that gives the truck an aggressive look and ride height for tires up to 35 inches with proper wheel spacing.
The kit uses lifted knuckles and strut spacers at the front. It also includes differential drop brackets, sway-bar drop brackets, brake line brackets and a drive shaft spacer, which the brand says keep the components at optimum angles after lifting for a factory-like ride.
The front and rear crossmembers are 1/4-inch plate steel and are updated for the newer F-150 design. The rear uses fabricated blocks engineered to prevent axle wrap, and the kit includes an N3 rear shock. The kit has no front shock.
Key features
- Lifted knuckles and strut spacers
- 1/4-inch plate steel front and rear crossmembers
- Crossmembers updated for the newer F-150 design
- Differential drop brackets and sway-bar drop brackets
- Fabricated rear blocks engineered to prevent axle wrap
- N3 rear shock
Front shock options
This kit leaves the front shock choice to the owner. The front suspension has to work with the rear N3 shock, so matching damping matters for a stable ride. A front shock that is too stiff or too soft can make the truck feel unsettled when the front and rear move at different rates.
Think about the driving before choosing front shocks. Daily road use, towing and off-road trail work each place different demands on the damper. Inspect the front suspension bushings and ball joints when the shocks are replaced, since worn components reduce what a new shock can do.
- Match front damping to the rear shock
- Inspect ball joints when replacing shocks
- Consider how the truck will be used
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C58730 |
| Lift kit | 6 inches |
| Shock series | N3 |
| Front shocks | None listed |
| Rear shocks | N3 |
| Rear lift component | Block |
| Tire size | 35 inches |
| Lift height range | 6 to 7 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL and XLT versions.
F-150 model years before 2021, the 2015–2020 trucks that use the R/C57531 and R/C55757 kits, and Ford Super Duty models are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The drive shaft spacer and the drop brackets change the driveline geometry, so check the driveline angles and the front alignment after installation.
What’s included
Lifted knuckles, strut spacers, front and rear crossmembers, drop brackets, brake line brackets, a drive shaft spacer, fabricated rear blocks and the rear N3 shock.
Not included: front shocks, since the product fields list none.












