Overview
The Icon Suspension V.S. 2.0 Aluminum Series Front Shock, part number 26517, is a gas charged monotube shock absorber for the front axle of a Jeep Wrangler JK with a 4-inch lift. It covers the 2007–2017 Jeep Wrangler (JK) in two-door and four-door models, including the Unlimited.
Icon positions the V.S. 2.0 as a cost effective upgrade for everyday street driving and weekend off-road trips. It is valved for the JK application, uses a polished nitro steel shaft and a 6063 anodized aluminum body, and can be rebuilt and revalved. That means the damping can be adjusted later if tires, lift or driving habits change.
The shock is sold individually, and each unit comes with top mounting hardware and bushings, so the upper end needs no separate parts. Because a complete front axle uses one shock per side, plan on two units.
Key features
- Nitrogen charged monotube design with an internal reservoir
- Premium grade 5WT shock oil for consistent damping through the stroke
- 100% rebuildable and 100% revalveable for later tuning
- Polyurethane bushings with zinc plated sleeves at the mounts
- Buna top out bumper for quiet operation at full extension
- 6061 aluminum rod end paired with the polished nitro steel shaft
- Made in the U.S.A.
Choosing a front shock setup
The front axle carries most of the braking load and steers the truck, so a front shock works hard on washboard roads and during quick direction changes. On a lifted JK, the geometry changes the angle the shock works at, which is why front damping and ride height should be considered together. A shock that feels firm on pavement can still control a heavy front end better than a worn unit that has lost damping.
Before installing, check the upper mount, the bushings and the bottom bolt for wear or cracking. Look at the shaft for oil film or scoring, since either can mean the seal is failing. Replacing both front shocks at once keeps the two sides matched, which helps the truck track straight under braking and on uneven ground.
Changing tire size or adding bumpers changes the load on the front shocks, so revisit the damping after those changes. A rebuildable, revalveable design lets the valving be adjusted as the truck’s setup changes. Bump stops and steering components should be inspected at the same time, since worn parts there can make a new shock feel ineffective.
- Check the upper mount and bushings for wear
- Replace front shocks in pairs where possible
- Recheck damping after tire or bumper changes
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 26517 |
| UPC | 700006854391 |
| Position | Front |
| Shock series | V.S. 2.0 Aluminum Series |
| Body | 6063 anodized aluminum |
| Shaft | 5/8 inch polished nitro steel |
| Rod end | 6061 aluminum |
| Bushings | Polyurethane with zinc plated sleeves |
| Top out bumper | Buna |
| Charge | Gas charged, nitrogen |
| Sold as | Individual shock |
| Made in | U.S.A. |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, the X, and the Unlimited versions of those trims. It is a direct fit for the JK front suspension.
The list does not cover the earlier Wrangler TJ or LJ, or the later Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The top end uses the included mounting hardware and bushings, and the bottom end uses the stock bolt. Because the shock is matched to a 4-inch lift, have the alignment checked after installation. Support the vehicle on stands before working on the front suspension.
What’s included
One V.S. 2.0 front shock with top mounting hardware and bushings.
Not included: The bottom mount uses the vehicle’s stock bolt.



