Overview
The Bilstein 5100 Series 24-285674 is a front shock absorber for 4WD Ram 2500 trucks from 2014 to 2026 and Ram 3500 trucks from 2013 to 2018. It is built for a 4 inch front lift, and it is sold individually.
The shock has a 46mm zinc-plated body with snap-ring grooves for the spring seat, which is how the front lift is set. Its collapsed length is 16.57 inches and its extended length is 25.47 inches. The unit is a monotube design with a digressive piston and a self-adjusting deflective disc valve, so the damping is set by the piston and valve rather than by a reservoir.
Key features
- Front lift of 4 in
- 4WD models only
- 46mm zinc-plated snap-ring grooved body
- Collapsed length 16.57 in and extended length 25.47 in
- Monotube design with a digressive piston
Front shock setup with a lift
A front shock works with the control arms, the track bar and the steering linkage, so a change in front height affects more than ride quality. Once a lift is in place, the front end may need an alignment check and the driveline angles should be looked at as well.
Replacing front shocks is a good time to look at the parts around them. Worn ball joints, sway bar links and bump stops can make a new shock feel loose or noisy, and they are easier to replace while the front end is already apart.
- Check brake hose length after the lift is installed
- Recheck torque on shock mounts after the first drives
- Inspect ball joints when front shocks are replaced
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-285674 |
| Shock series | 5100 Series |
| Position | Front |
| Drive type | 4WD only |
| Front lift | 4 in |
| Body diameter | 46mm |
| Collapsed length | 16.57 in |
| Extended length | 25.47 in |
| Shock type | Monotube, gas-charged |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014 through 2026 Ram 2500 and the 2013 through 2018 Ram 3500. The 4WD requirement applies to the Ram 2500 fitment.
Two-wheel-drive Ram 2500 trucks, Ram 1500 models and Ram 2500 and 3500 years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-285674: one front shock absorber, sold individually.
Installation notes
Because this shock is built for a 4 inch front lift, confirm the lift on your truck before ordering. Recheck the front alignment and the driveline angles after the new ride height is set.












