Overview
The Pro Comp Series 36 Helldorado in 20×9.5 inches is a satin black aluminum wheel, part number PXA7036-29555, listed with a 5 on 150 bolt pattern. Pro Comp Alloy Wheels builds the Helldorado in its 36 series for trucks and SUVs that call for a 20 inch alloy with brake clearance in mind.
The wheel has a -6 offset, which places the mounting face behind the centerline and the wheel outward from the hub. The 5 backspacing is measured from the mounting face to the back edge of the rim. Pro Comp describes its alloy wheels as produced with low-pressure casting for strength and value.
Key features
- Aluminum construction with a spoke design
- 20 inch diameter and 9.5 inch width
- 5 on 150 bolt pattern.
- -6 offset and 5 backspacing
- Satin black finish
- Helldorado styling from the 36 Series
Clearance on a 20 inch wheel
A 20 inch wheel brings a larger rim and a lower-profile tire, which changes how the wheel sits in the wheel well. Clearance is the main concern, since the offset decides how far the rim reaches toward the brake caliper and the fender. Brake calipers are often the tightest point on a bigger wheel, so check the inside of the spokes against the caliper before the wheel goes on the hub. Tire height also matters, because a taller tire can rub at full lock.
Aluminum spoke wheels are lighter than steel of the same size, which helps unsprung weight, but the spokes can be scratched by bead breakers or rough tire changers. Use a soft mounting surface and avoid dragging the wheel across gravel. Check the lug seats and spoke faces after a few months of use, looking for cracked paint or small dents that could hide a bigger fault.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7036-29555 |
| Series | 36 Series Helldorado |
| Construction | Aluminum |
| Style | Series 7036 Helldorado |
| Finish | Satin black |
| Diameter | 20 inches |
| Width | 9.5 inches |
| Bolt pattern | 5 on 150 |
| Offset | -6 |
| Backspacing | 5 |
Vehicle fitment
This wheel is not tied to a particular year, make, model or chassis code, so fit depends on the hub and the clearance. Match the 5 on 150 bolt pattern to the hub with a measuring tool before anything else, since it is an unusual layout. The -6 offset and 5 backspacing then set the clearance, so compare them with your fender and brake space. A universal fit label does not replace that check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the bolt pattern on your hub with a measuring tool before ordering, and confirm the lug nut seat matches the wheel. Check the tire’s clearance at full lock once the wheel is mounted.
What’s included
The 20×9.5 wheel (PXA7036-29555) is sold alone, without a center cap.
Not included: Center cap and lug nuts for part PXA7036-29555, which are sold separately.















