Overview
The Pro Comp 41 Series Phaser 17×9 wheel, part number PXA2641-7973, is a 17-inch aluminum split spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern (5×5) and a graphite finish.
The wheel has an offset of -6 and a backspacing of 4.75. It is cast with low-pressure methods and is a universal fit design. Measure the hub’s center bore before choosing this wheel.
Key features
- Low-pressure cast aluminum
- 17-inch diameter and 9-inch width
- 5 on 5 bolt pattern (titled 5×5)
- Offset -6 with backspacing 4.75
- Split spoke design
- Graphite finish
Hub fit and offset
Split spoke wheels depend on a precise fit between the hub and the wheel. With a negative offset, the mounting face sits farther out, so measure how much room the brake caliper and fender leave before mounting. A wheel that seats on the studs can still rub the fender at full steering lock or on suspension travel, so a test fit with the tire mounted is the dependable check.
Shoppers often pair a wheel like this with a different tire width or sidewall height. A change in tire size alters the rolling diameter and can move the tread closer to the fender liner. Keep wheel width and tire size together when deciding what clearance to expect.
- Confirm hub diameter before mounting
- Check caliper clearance at full lock
- Re-torque lug nuts after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA2641-7973 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Split spoke |
| Finish | Graphite |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
This wheel is not tied to a make, model or year. Universal fit means the 5 on 5 bolt pattern and the hub’s center bore must be confirmed for each vehicle, and the -6 offset should be measured against the fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the specification gives no center bore, measure the hub diameter before mounting. Negative offset moves the wheel outward, so check fender and suspension clearance on the vehicle.
Graphite is the finish, and the split spoke design is cast in aluminum at 17 by 9 inches. Because the specification gives no center bore, the hub match should be confirmed by measurement rather than by the 5 on 5 pattern alone.
What’s included
One 17×9 wheel in graphite is included. Verify the package contents against your installation before starting.













