Select your vehicle

Pro Comp 40 Series Vertigo, 17x9 Wheel with 5 on 5 Bolt Pattern – Satin Black and Milled – 5140-7973

Pro Comp Alloy Wheels

Shop Pro Comp Alloy Wheels 17x9 5x5 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 40 Series Vertigo 17×9, part number PXA5140-7973
  • 5 on 5 bolt pattern, center bore 83
  • Satin black and milled finish
  • Offset -6, backspacing 4.75

Description

Overview

The Pro Comp 40 Series Vertigo 17×9 wheel, part number PXA5140-7973, is a 17-inch aluminum split spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern and a satin black finish with milled accents, which the series name calls 40 Series Vertigo satin black and milled.

Pro Comp builds this wheel with low-pressure casting. The -6 offset and 4.75 backspacing set how far the wheel face sits outward, and the wheel is universal fit, so the 83 center bore and hub measurements decide the fit.

Key features

  • Low-pressure cast aluminum
  • 17-inch diameter, 9-inch width
  • 5 on 5 bolt pattern
  • Center bore 83
  • Offset -6, backspacing 4.75
  • Satin black with a milled finish
  • Split spoke styling

Cleaning milled finishes

Milled accents on a satin black wheel catch dirt in the cut edges and leave a fine contrast line. Routine cleaning with a soft brush and a mild wheel cleaner keeps those edges visible. Abrasive pads can scratch the satin surface and blur the milling, so they are best avoided.

The split spoke design means the spokes trap brake dust near the hub face. Rinse the back of the spokes when the wheel is off the vehicle, since dust there can work into the finish. After any tire change, inspect the milled areas for chips, and keep the surface dry before storing the wheel.

  • Rinse the spoke backs during tire changes
  • Use a soft brush in milled grooves
  • Inspect milled edges for chips at each service

Specifications

Brand Pro Comp Alloy Wheels
Part number PXA5140-7973
Wheel diameter 17 inches
Wheel width 9 inches
Bolt pattern 5 on 5
Center bore 83
Offset -6
Backspacing 4.75
Style Split spoke
Finish Satin black and milled
Construction Aluminum
Series 40 Series Vertigo

Vehicle fitment

This 17×9 wheel is not matched to a vehicle, and the fitment is universal. A 5 on 5 hub with an 83 center bore is the match to confirm. The -6 offset should be measured against the fender before the wheel is used on the road.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A milled finish on the spoke face is cosmetic, but the offset and backspacing decide fit. Check fender and brake clearance with the wheel on the hub before driving.

What’s included

The package is one 17×9 satin black wheel with milled finish. Inventory the contents against your installation steps before work begins.

SKU: PXA5140-7973 Categories: ,

Questions & Answers

Is the PXA5140-7973 a 5 on 5 wheel with an 83 center bore?

Yes. The bolt pattern is 5 on 5 and the center bore is 83. The wheel is 17 inches in diameter and 9 inches wide with an offset of -6.

What finish does this Vertigo have?

It is satin black with a milled finish and a split spoke design in aluminum. The milled accents are cosmetic, so offset, bolt pattern and center bore should decide whether it suits your vehicle.

Is this wheel built for a specific vehicle?

No. It is universal fit and is not tied to one vehicle. Confirm the bolt pattern, center bore, offset and clearance for your application, and check the year, model and trim before ordering.

How should a milled finish be cleaned?

Use a soft cloth and a mild wheel cleaner. Avoid abrasive pads in the milled grooves, since they can scratch the satin black surface and wear the finish along the edges.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Alloy Wheels 17x9 5x5 on Amazon