Overview
The Pro Comp PXA5172-7905 is a 17×9 aluminum spoke wheel from the Pro Comp 72 Series Axis line, in satin black milled with a 5 on 5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -6.
This 9-inch-wide wheel has a backspacing of 4.75. The specifications also list a second bolt pattern of 5 on 5.5 with 139.7, so confirm which layout your hub uses before ordering.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern, with a second listed pattern of 5 on 5.5
- Center bore of 108
- Offset -6 with 4.75 backspacing
Spoke clearance and fit
Spoke wheels leave open space between the spokes, which helps airflow to the brakes. That open design also means the brake caliper and rotor can be seen through the face, so check that the spokes clear the caliper at full steering lock. Mount the wheel with the tire and turn the steering from side to side before the first drive.
Weight matters on a spoke wheel too. A heavier wheel adds unsprung mass, which can affect how the suspension tracks over bumps. When choosing a tire, match the width to the rim and check that the sidewall does not rub the inner fender after the suspension has been loaded. Keep the lug nut seats clean and dry, and inspect the spoke roots for hairline cracks after heavy trail use.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5172-7905 |
| Series | 72 Series Axis |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Second listed bolt pattern | 5 on 5.5 (139.7) |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the Axis to a model. Because two bolt patterns are listed, the hub must be measured before ordering, and the -6 offset then needs a clearance check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub to see whether it is a 5 on 5 or a 5 on 5.5 layout, since the two listed patterns are different and only one will seat. Confirm the 108 center bore against the hub pilot, then test-fit the rim with the tire. The 5 on 5 and 5 on 5.5 hub layouts are different, so confirm which one the vehicle uses before buying, because a wheel will not seat on the wrong spacing. The 108 center bore must match the hub pilot, and the 9-inch width needs a tire sized to that rim. Because the Axis is a spoke design, look for clearance between the spokes and the brake caliper when the wheel is turned to full lock.
What’s included
One 17×9 aluminum wheel in satin black milled.











