Overview
The Pro Comp 41 Series Phaser 18×9 wheel, part number PXA5041-898350, is an 18-inch aluminum split spoke wheel that is 9 inches wide. It has a 6 on 5.5 bolt pattern and a satin black finish, shown in the series name as 41 Series Phaser satin black.
The wheel has a 108 center bore, a 0 offset and a backspacing of 5. The alloy is low-pressure cast. Because the wheel is not assigned to a vehicle, the hub pattern and clearance figures decide whether it suits a given application.
Key features
- Low-pressure cast aluminum
- 18 inches in diameter and 9 inches wide
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset 0 with backspacing 5
- Satin black split spoke finish
Caliper room on 18-inch wheels
A 0 offset places the mounting face near the centerline of the wheel, so clearance is more even between the inner and outer sides. That balance does not guarantee room, because an 18-inch wheel leaves less space behind its spokes than a larger-diameter wheel. Brake calipers, rotors and dust shields all sit in that space, and a larger rotor or caliper upgrade can reduce it further.
Before choosing a tire, look through the spoke openings with the wheel on the hub and note how close the caliper body and bolts come to the spokes. Tire sidewall height changes how much the tire grows at the bead, so measure again after each tire change.
- Look through spoke openings to the caliper
- Recheck after any brake upgrade
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5041-898350 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
The wheel has no vehicle list. Compare the 6 on 5.5 pattern and 108 center bore with the hub, and confirm that the 18-inch size fits under the caliper and the tire you intend to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 offset keeps the mounting face centered, but the 18-inch diameter still needs caliper and tire clearance checks. Confirm both with the wheel mounted before the first drive.
The 6 on 5.5 pattern and 108 center bore should match the hub, and the 0 offset keeps the face centered. Check the 18-inch size against the caliper and tire before driving.
What’s included
This item is one 18×9 wheel in satin black. Verify the lug hardware and center caps your hub needs.











