Overview
The Pro Comp PXA5161-298350 is a 20-inch aluminum split-spoke wheel from the Pro Comp 61 Series, in satin black milled with a 6 on 5.5 bolt pattern. Measure the rim width across the bead seats before choosing a tire, since the width should be confirmed.
Pro Comp describes its alloy wheels as low-pressure cast and rates the range from 2500 to 3650 lbs per wheel. This wheel has a center bore of 108, a zero offset and a backspacing of 5. Those figures, together with the width, decide where the tire sits relative to the fender and the brake parts.
Key features
- Low-pressure cast aluminum
- Split-spoke design
- 20-inch diameter
- 6 on 5.5 bolt pattern
- Center bore of 108
- Zero offset and 5 backspacing
Confirming the rim width
When a rim’s width is unclear, measure across the inner bead seats of the bare wheel. The measurement gives the true width that a tire must match, and it avoids guessing from a name or label.
Tire choice follows from the rim width. Each tire has an approved width range, and mounting outside that range can cause uneven wear, poor handling and a higher chance of the bead unseating off road. Compare the tire’s rated width range with the measured rim before buying, and pick a tire height that keeps the overall diameter close to the original.
- Measure the bead seat, not the outer lip
- Compare the tire’s approved width range
- Keep overall diameter close to the original
- Recheck the fit after any spacer change
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5161-298350 |
| Series | 61 Series |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie it to a model, so the 6 on 5.5 bolt pattern and 108 center bore are the figures to compare with the hub, and the width needs to be confirmed as well.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the width is listed two ways, confirm the exact rim width before you pick a tire. Mount only to a six-lug hub at 5.5, and test-fit the zero-offset rim to check the brake caliper and fender clearance.
What’s included
One 20-inch aluminum wheel. Have your own lug hardware ready before mounting.











