Overview
The Pro Comp 41 Series Phaser 17×9 wheel, part number PXA5041-7983, is a 17-inch aluminum split spoke wheel with a 9-inch width. It has a 6 on 5.5 bolt pattern and a satin black finish, and it is finished with stainless steel bolts.
The 83 center bore, -6 offset and 4.75 backspacing define how the wheel mounts and where its face sits. The wheel is built with low-pressure casting and is universal fit, so the vehicle should be checked against these numbers rather than a model name.
Key features
- Low-pressure cast aluminum
- 17 inches in diameter, 9 inches wide
- 6 on 5.5 bolt pattern
- Center bore 83
- Offset -6 and backspacing 4.75
- Satin black split spoke finish
- Stainless steel bolts included with this finish.
Stainless bolts and lug care
Stainless steel lug bolts resist corrosion better than plain steel, which matters when the wheel sees mud, salt and water. They still need correct seating against the wheel, so inspect the bolt seat for damage and check that the thread length suits the hub before tightening. Lug nuts and bolts should match the seat type that the wheel was made for.
Satin black finishes scratch more readily than some colors, and a bolt with rough threads can gouge the surface during installation. Clean the threads and the seat, and avoid mixing bolt types across one wheel. Re-check tightness after the first few drives, and again after a tire change.
- Clean threads and seats before installing
- Avoid mixing bolt types on one wheel
- Inspect bolt seats at each tire rotation
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5041-7983 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
The wheel is not tied to a vehicle and carries a universal fit label. Confirm that the 6 on 5.5 hub and the 83 center bore match your vehicle, then measure clearance for the -6 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This satin black finish comes with stainless steel bolts. Check the bolt seat and length against the wheel before tightening, and confirm fender clearance with the wheel mounted.
What’s included
The package is one 17×9 satin black wheel, with stainless steel bolts for this finish.











