Overview
The Pro Comp Xtreme Alloys 3186 Series is a 20×9 alloy wheel with a 6×135 bolt pattern and a black machined finish. The part number is PXA3186-293650, and the wheel has a 5 inch back spacing.
Confirm the offset and load rating for your application before ordering. Check the bolt pattern, back spacing and hub bore against your vehicle as well.
Care and maintenance
Machined faces are cut to show bare metal, so they are prone to dulling if left exposed to road salt and grit. A soft cloth, a mild soap and a rinse keep the cut edges clean. Avoid abrasive pads, which can scratch the machined surface and make later repairs harder.
Large wheels with a 5 inch back spacing sit close to the brake and suspension parts on many vehicles, so debris can collect behind the spokes. Brush out mud after off-road runs and inspect the inner barrel for bent lips or cracks. Check lug nut torque after the first drives, and re-check it regularly on rough roads. Keep a record of tire pressure and inspect the valve stem during each service. Wheels that are rotated or swapped should be checked for runout and balance before the next trail run.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA3186-293650 |
| Series | Xtreme Alloys 3186 Series |
| Diameter | 20 in |
| Width | 9 in |
| Bolt pattern | 6×135 in |
| Back spacing | 5 in |
| Finish | Black machined |
Vehicle fitment
Match the 6×135 pattern and hub bore to your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel only.









