Overview
The Rough Country N3 front shock R/C23237_A is a nitrogen-charged twin-tube shock for the 1971–1980 International Scout II. It is built for a truck at stock height, with no lift, and it uses a stud at the top and an eyelet at the bottom.
Front shocks control how quickly the springs compress and rebound, which affects ride quality, body control and tire contact on rough ground. This N3 unit uses a ten-stage variable valving setup and a nitrogen charge. The extended length is 19.03 in and the collapsed length is 12.1 in. The listed fitment is for the Scout II only, so other Scout years are not covered by this part.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings for better vibration absorption
- Military spec damper fluid
Stock height and original mounts
Stock-height shocks are meant to restore the factory ride, so their main job is to control the original spring rate and body roll without changing the truck’s height. A front shock that is too long or too short will shift the spring preload, leading to sag, poor steering return or a harsh ride over small bumps.
Original-style trucks often have hardened bushings, rusted brackets and tired spring perches. Clean and inspect these parts while the old shocks are off, and replace any worn rubber. A new shock will only perform as designed when its mounts are solid, so treat the surrounding hardware as part of the same job.
- Clean the stud and eyelet mounts
- Check spring perches for rust or cracking
- Replace brittle or split bushings
- Verify the stock ride height before fitting
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23237_A |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | No lift (0 in.) |
| Top mount | Stud |
| Bottom mount | Eyelet |
| Extended length | 19.03 in |
| Collapsed length | 12.1 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Fluid | Military spec |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It is sized for a stock-height truck and fits the 1971–1980 International Scout II across its base, SS2, Terra, Traveler and XLC models.
The list covers the Scout II only, so other Scout years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is sized for stock height, it is not a lift part. Check the eyelet and stud mounts against the existing front shocks before ordering so the replacement matches the original positions.
What’s included
Sold as a pair: two N3 front shocks, one for each side.









