Overview
The Pro Comp 57001B is a Pro Runner upper control arm with 1.5-inch Uniball ball joints and heavy-duty chromoly construction, made for lifted, leveled or stock trucks. It is the 1.5-inch version of Pro Comp’s upper arm line, built to replace factory arms that Pro Comp says have weak ball joints and stamped steel construction.
Oversized stainless steel FK Uniball joints provide the joint strength, and the 1.5-inch chromoly tubing is paired with reinforced pivot bushing mounts. Large PTMEG pivot bushings with zerk fittings are used at the body end of the arm.
The 57001B is the 1.5-inch version of the arm. Compare the mounting points with your factory arm before ordering, since no vehicle is named for this part.
Key features
- 1.5-inch Uniball ball joints in stainless steel FK
- Heavy-duty 1.5-inch chromoly tubular construction
- Reinforced pivot bushing mounts
- Large PTMEG pivot bushings with zerk fittings
- Zerk dust caps included
- Black powder coat finish
Joint size and arm strength
The ball joint size on an upper arm affects how much load the joint can carry and how it fits the knuckle. Larger joints generally suit heavier use, but only when the rest of the arm and the mounts are built to match.
Heavy-duty chromoly tubing resists bending under hard off-road hits, while reinforced pivot mounts keep the arm from flexing at the frame. Together these features keep the wheel positioned under braking and bump loads.
When upgrading, consider the bushings, the track bar and the lower joints as a group. Grease the zerk fittings at regular intervals and check the dust caps after trail use.
- Compare joint size with the factory arm
- Check the pivot bushings at service
- Inspect the knuckle fit before installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57001B |
| UPC | 614901099669 |
| Position | Front upper |
| Ball joints | 1.5-inch Uniball, stainless steel FK |
| Tubing | Heavy-duty chromoly, tubular, 1.5 inch |
| Bushings | PTMEG pivot bushings with zerk fittings |
| Dust caps | Zerk dust caps included |
| Finish | Black powder coat |
Vehicle fitment
No vehicle is named for the 57001B. The arm is made for lifted, leveled or stock trucks in general, so check the joint size against your factory arm before ordering.
Because no year, make or model is given, confirm your vehicle’s year, model and trim before ordering.
What’s included
Zerk dust caps are included with the arm.































