Overview
The Skyjacker JKLL24F is a pair of front lower standard control arms for 2007–2018 Jeep Wrangler JK models. Skyjacker calls them its value flex control arms, and they are fitted with a greasable polyurethane bushing on both ends. The pair includes bushings and sleeves.
These are front lower standard control arms with a direct fit at the front lower position. The greasable polyurethane bushings can be serviced with grease. They are standard arms, not adjustable ones.
Key features
- Standard lower control arm, sold as a pair
- Greasable polyurethane bushings on both ends
- Bushings and sleeves included
- Front lower position
- Direct fit for the listed JK models
Care for control arm bushings
Control arm bushings take the load of the axle as the suspension moves up and down, so they wear over time. Greasable bushings can be serviced to extend their life, but they still need periodic inspection for cracking, splitting or play. Front lower arms are part of the steering and alignment setup, so their condition has a direct effect on how the vehicle tracks.
Grease the fittings at regular intervals, and wipe away dirt before pushing grease in so grit is not forced into the bushing. Check the sleeves and bolts after the first few drives, since loose hardware can change the alignment. Replace a pair when one arm shows wear so both sides stay matched.
- Grease fittings at regular service
- Recheck alignment after arm changes
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYJKLL24F |
| Position | Front lower |
| Quantity | Pair |
| Bushings | Greasable polyurethane, both ends |
| Sleeves | Included |
| Fitment type | Direct fit |
Vehicle fitment
Skyjacker lists these control arms for the 2007–2018 Jeep Wrangler (JK), including 2-door models and Unlimited 4-door models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Wrangler TJ, LJ and JL models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a control arm, the front alignment should be checked after the arms are installed.








