Overview
The ZX2110 is a front Pro Runner SS monotube shock absorber for the 2004–2012 Nissan Titan. It is designed for a lift between 2 and 6 inches.
The body is nitrogen gas charged and built as a monotube, and the nitrogen pressure keeps the oil from foaming during compression and rebound. The monotube design gives better heat dissipation than a twin tube hydraulic shock, which reduces fade when the truck is worked hard. Valving is multi-stage and set for the application.
The shock is finished in a brushed zinc with a clear coat and uses a 2 inch diameter body. A rubber bushing and black polyurethane boots are included, so the mounting and dust protection hardware comes with the shock.
The 2 to 6 inch lift range means the shock suits both a small lift and a larger one, and the valving is set for the application rather than a single height. A truck at the upper end of that range should have its mounts and brackets checked for clearance at full compression before installation. The shock also carries a 90-day ride guarantee and a lifetime warranty that transfers to a new owner.
Key features
- Front position, direct fit
- Designed for a 2 to 6 inch lift
- Nitrogen gas charged monotube
- Multi-stage valving tuned to the application
- Rubber bushing and black polyurethane boots included
Full-size truck front ends
A front shock on a full-size truck controls the motion of the axle, the upper arm and the springs over bumps and under braking. Its job gets harder when the truck carries a load, tows or runs larger tires. When the shock loses control, the front end may pitch, wander on the highway or bottom out on rough ground.
Because the front end is made of many linked parts, it helps to look at the bushings, ball joints and tie rod ends when the shock is replaced. A small amount of play at any one of those parts can make a new shock feel like it is not doing its job. Keep the boots clean and check the mounts after the first few drives.
- Check bushings for cracking
- Inspect ball joints and tie rod ends
- Look for oil on the shock body
- Recheck mount bolts after early drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2110 |
| UPC | 614901099942 |
| Shock series | Pro Runner SS |
| Position | Front |
| Lift height | 2 to 6 in. |
| Body diameter | 2 in |
| Charge | Nitrogen, gas charged |
| Finish | Brushed zinc, clear coat |
| Bushing | Rubber, included |
| Boots | Black polyurethane, included |
| Ride guarantee | 90 days |
| Warranty | Lifetime, transferable |
Vehicle fitment
It is a direct fit for the 2004–2012 Nissan Titan, in the front position at a 2 to 6 inch lift.
The Nissan Armada and Frontier are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner SS monotube shock with rubber bushing and black polyurethane boots.











































