Overview
The 332010 is a twin tube gas shock from the ES3000 line. Its 10-stage velocity sensitive valving adjusts to the road, and its 5/8-inch chrome hardened piston rod works with a Teflon rebound stop. It is designed for use on and off the road and comes with a limited lifetime warranty. It has factory mounts and is not adjustable.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Limited lifetime warranty
Signs of a worn shock
Shock absorbers slow the rebound of springs after bumps, and that control fades as the internal seals and valving wear. A worn unit lets the body bounce several times after a dip, leans more in corners, and may let the front dive under hard braking. These changes build up slowly, so drivers often adapt before noticing them.
Check the shock body for oil streaks, which mean the seal has failed. A knocking noise over small bumps can point to worn eyelets or mounts rather than the shock itself, so inspect the hardware before buying a replacement. Tires with cupped wear patterns also suggest damping has dropped.
Shocks are usually replaced in pairs on the same axle so both sides respond alike. When the axle is out for other work, it is a sensible time to inspect the bump stops and springs too, since they affect how the shock is loaded.
- Oil streaks on the body
- Bouncing after a single dip
- Cupped tire wear
- Knocking over small bumps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332010 |
| UPC | 614901042993 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
The ES3000 is designed to improve driving comfort and performance on and off the road. The 10-stage velocity sensitive valving adjusts to varying road conditions and improves handling. The shock has factory upper and lower mounts.
The 5/8-inch chrome hardened piston rod and Teflon rebound stop are part of the same design, and Pro Comp backs the ES3000 line with its limited lifetime warranty.
Vehicle fitment
Check the vehicle specific lengths against the shock being replaced, and confirm the year, model and trim that match your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is listed with factory mounts, so it replaces the original shock without new brackets. Confirm the lengths before installing.
What’s included
- One ES3000 shock absorber












