Select your vehicle
-13%

Pro Comp ES9000 Series Shock Absorber – 915553

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES9000 Series shock absorber, part number 915553
  • Extended 15.25 in, collapsed 10.25 in, travel 5.00 in
  • Stem upper mount and loop lower mount
  • Twin tube design; not adjustable; white finish

Description

Overview

The Pro Comp 915553 is an ES9000 Series twin tube shock absorber with a stem upper mount and a loop lower mount. The specification gives an extended length of 15.25 inches, a collapsed length of 10.25 inches and 5.00 inches of travel. No remote reservoir is fitted, and the shock cannot be adjusted.

Measure the installed shock before choosing, since the lengths for this shock differ slightly: 15.5 inches extended with 10.17 inches collapsed, or 15.25 inches extended with 10.25 inches collapsed.

The 10 stage velocity sensitive valving suits highway comfort and helps off-road handling. The 1 3/8 inch nylon banded full displacement piston head and the double welded shock mounts are built for strength.

Key features

  • Twin tube design
  • Stem upper mount, loop lower mount
  • 10 stage velocity sensitive valving
  • 1 3/8 inch nylon banded piston head
  • Double welded shock mounts

Before you buy

A replacement shock should match the job it does on the vehicle. Twin tube dampers handle heat better than mono tube designs for many trail and road uses, but the body is only one part of the decision. Look at where the shock sits, how it loads the mounts, and whether the vehicle is driven mostly on pavement or on uneven ground.

Stem and loop mounts are common on lighter vehicles, and they put side load into the bushings when the travel is long. Replacing bushings or mount hardware at the same time keeps the new shock aligned. Check the bolts after the first few drives, since loose hardware can change how the damper moves.

  • Confirm the mount pattern before ordering
  • Replace worn bushings with the shock
  • Re-check mount bolts after the first drives

Specifications

Brand Pro Comp Suspension
Part number 915553
UPC 614901696226
Shock series ES9000 Series
Extended length 15.25 in (specification)
Collapsed length 10.25 in (specification)
Travel length 5.00 in
Upper mount Stem
Lower mount Loop
Adjustable No
Remote reservoir No
Finish White
Boot Not included
Sold as Each

Vehicle fitment

Confirm fit for a rear or front position that uses a stem upper mount and loop lower mount before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES9000 Series shock absorber, without a boot.

SKU: EXP915553 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

What mounts does the 915553 use?

It has a stem upper mount and a loop lower mount, so both ends must match the brackets on your vehicle before the shock is installed.

What is the travel of the 915553?

The shock has 5.00 inches of travel, a 10.25 inch collapsed length and a 15.25 inch extended length. Measure the installed shock before ordering, since the lengths vary slightly between the figures shown.

Is the 915553 adjustable?

No. The shock is not adjustable and has no remote reservoir, and it is finished in white and sold as each.

Should the boot be replaced with a new shock?

A boot is sold separately for this shock, so check whether the old one is intact before installing. A torn boot lets grit reach the shaft seal, which shortens the life of the damper. Replace it if it is cracked or split.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon