Overview
The Pro Comp Suspension ES3000 319553 is a hydraulic shock absorber from the ES3000 Series. Its lengths are vehicle specific, and it mounts at the factory upper and lower points.
This shock is a twin tube cellular gas unit with 10-stage velocity-sensitive valving. Pro Comp says its 5/8 inch chrome-hardened piston rod and Teflon rebound stop handle the most demanding driving conditions, and the double welded mounts add strength. The shock is covered by the Pro Comp Suspension limited lifetime warranty. Shock damping decides how firmly the suspension controls rebound, which matters more on a loaded or lifted truck, and the factory mounts keep the shock at the original points.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Pro Comp Suspension limited lifetime warranty
When to replace shocks
A shock’s job is to control how fast the springs rebound and compress, which keeps the tires in contact with the ground. When a shock weakens, the body keeps moving after a dip, the front end can feel loose on pavement, and the tires may wear in a cupped pattern. Trucks that carry extra weight or run larger tires put more load on the shock, so wear shows up sooner.
Shocks are usually replaced in pairs on the same axle so the damping stays even from side to side. While the old unit is off, inspect the mounts and bushings for cracks and play. A leak down the body means the seal has failed and the damping is gone. Worn springs or bump stops can produce a similar ride, so check those parts before deciding the shock alone is the problem.
- Oil on the outer tube or body
- Cupped or uneven tire wear
- Body bounce after a single dip
- Clunking at the upper or lower mount
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 319553 |
| UPC | 614901992380 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so confirm those before ordering. Check the factory mount points against your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.
Not included: the dust boot.












