Overview
The Pro Comp ZX2087 is a rear Pro Runner monotube shock absorber for the Jeep CJ5 (1976–1983) and CJ7 (1976–1986). It is designed for a 3 to 4 inch lift, and it is the rear counterpart to Pro Comp’s front ZX2086 for the same vehicles.
The monotube body is gas charged, and the nitrogen charge reduces cavitation during compression and rebound. The design dissipates heat more efficiently than a traditional twin tube shock. The valving is multi-stage, tuned to the vehicle, and the body is zinc plated and clear coated.
The ZX2087 is the rear shock for the CJ5 and CJ7 at 3 to 4 inches of lift. A gas charged monotube keeps the oil under nitrogen pressure through a floating piston, which helps the shock hold its damping over repeated compression and rebound. It is the rear counterpart of the ZX2086 for the same vehicles.
Key features
- Rear position, direct fit
- Designed for 3 to 4 inches of lift
- Gas charged monotube
- Multi-stage valving
- Zinc plated, clear coated finish
Rear damping on a CJ
On a CJ, the rear shocks control the axle through the leaf springs and help keep the body settled on rough trails. A monotube body keeps the damping consistent over repeated compression and rebound, which is useful when the truck is loaded or driven off pavement. The rear shock works with the front shock, so the two should be considered together.
Inspect the rear shocks for fluid on the body, worn eye bushings and loose mounts. Look for signs the axle is hopping or the body rocks after bumps. If one rear shock is replaced, compare it with the other and consider replacing both if the old one shows wear. Keep the mounts tight and check them after rough runs.
- Check eye bushings for cracks
- Look for fluid on the body
- Compare left and right rear shocks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2087 |
| UPC | 614901094961 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 3 to 4 in. |
| Body | Monotube, gas charged |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is a rear direct fit for the 1976–1983 CJ5 and 1976–1986 CJ7, with 3 to 4 inches of lift.
Later Wrangler and Cherokee models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear Pro Runner monotube shock, sold as each.






























