Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 329543

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 shock absorber, part number 329543, factory upper and lower mounts
  • Extended, collapsed and travel lengths are vehicle specific
  • Twin-tube gas design with 10-stage velocity-sensitive valving
  • Non-adjustable, white finish, sold as each; no fitment list for this number

Description

Overview

The Pro Comp ES3000 Series shock absorber, part number 329543, is a factory-mount twin-tube gas shock. Its extended, collapsed and travel lengths are vehicle specific. Confirm fit for your vehicle’s year, model and trim before ordering.

Because the length is set by the application, the 329543 is a shock to match against the original part rather than a size to pick from a chart. The internal design follows the ES3000 line: a gas-charged tube with valving that changes damping with the speed of the bump.

Key features

  • 10-stage velocity-sensitive valving that changes damping with the speed of the bump.
  • A chrome-hardened 5/8 inch piston rod.
  • A Teflon rebound stop that quiets the return stroke.
  • Double-welded mounts at both ends of the shock.
  • Pro Comp Suspension gives the shock a limited lifetime warranty.

Choosing a replacement shock

A shock controls how fast the spring compresses and rebounds, so a replacement of the wrong length changes how the whole suspension behaves. Worn units often leave the body bouncing after dips and bumps, and the tires can lose contact on uneven ground. Matching the original mount-to-mount dimension is the first step before anything else.

Gas-charged designs tend to keep damping steadier under repeated use than oil-only units, but the gas charge does not change length. Replacing shocks in pairs on the same axle keeps the ride even from side to side, since one fresh unit and one worn unit feel different on the road.

  • Measure the removed shock eye to eye before ordering
  • Inspect the old unit for oil seepage or a dented tube
  • Replace both front or both rear units together

Specifications

Brand Pro Comp Suspension
Part number 329543
UPC 614901695939
Shock series ES3000
Extended length Vehicle specific
Collapsed length Vehicle specific
Travel length Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Dust boot included No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Measure the mount-to-mount length of the original shock on the truck before choosing part 329543.

Vehicle-specific lengths mean a shock that looks the same can still be the wrong length. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Factory mounts should accept the new shock without modification, but only if the length at full compression and extension suits your suspension. Compare the old shock’s measurements with the vehicle-specific numbers first.

What’s included

One ES3000 shock absorber.

Not included: a dust boot. Pro Comp lists boot included as No.

SKU: EXP329543 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Does Pro Comp list vehicles for the 329543?

No. Confirm fit for your vehicle's year, model and trim before ordering, and compare the length with the shock you are replacing.

Is the 329543 adjustable?

No. It is non-adjustable, so there is no external control for changing the damping. The 10-stage valving sets how the shock responds to movement.

What finish does the 329543 have?

It has a white finish, and it is sold as each shock rather than as a set. Buy one for each position you need to replace on the truck.

Should I replace shocks in pairs?

Usually, yes. Replacing both shocks on the same axle keeps damping consistent from side to side, which helps steering and stability. Inspect the other shock for leaks or wear before deciding whether it needs replacing too.

How can I tell a shock needs replacing?

Common signs include oil on the outside of the tube, a bouncy ride after bumps, and uneven tire wear. Push down hard on a corner and let go; a healthy shock settles quickly instead of rebounding several times.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon