Overview
The Pro Comp Suspension ES3000 321506 is a rear hydraulic shock absorber with loop mounts at both ends. It measures 21.61 in extended and 13.22 in collapsed, with 8.29 in of travel. Pro Comp rates it for 0 to 1 in. of lift, so it suits a rear suspension at or near stock height. No vehicle is named for this part number, and the shock is non-adjustable.
The ES3000 is a twin tube cellular gas design. Its 10-stage velocity-sensitive valving responds to road conditions, and the 5/8 inch chrome-hardened piston rod and Teflon rebound stop support comfortable highway driving as well as more demanding use. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the design.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position
- Pro Comp Suspension limited lifetime warranty
Rear suspension basics
A rear shock controls the rear springs and axle, which affects braking, traction and body motion over bumps. The rear carries a different share of the load than the front, so its damping needs can feel different. A worn rear unit often shows up as bounce after speed bumps or a loose feeling at highway speeds.
Loop mounts at both ends are easy to inspect. Check the eyes for cracks, the bushings for compression and the fasteners for looseness. Rear shocks often use rubber bushings that wear faster on trucks used for towing or off-road work.
When a rear shock is replaced, the other side on the same axle should be checked as well. Matched units keep the rear end even and reduce pull under braking. Check the rear springs, bump stops and axle mounts at the same time, since they work together under load.
- Check loop eyes for cracks
- Inspect bushings for compression
- Replace rear shocks in pairs
- Check bump stops and spring mounts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321506 |
| UPC | 614901041293 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 21.61 in |
| Collapsed length | 13.22 in |
| Travel length | 8.29 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear shock. Confirm fit for your vehicle’s year, model and trim before ordering, and check the rear mounting points and the 0 to 1 in. lift rating against your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 321506.
Not included: the dust boot.










