Overview
The Pro Comp Suspension ES3000 325553 is a hydraulic shock absorber from the ES3000 Series. It measures 25.22 in extended and 15.22 in collapsed, with 10.00 in of travel. The shock has a stem upper mount and a loop lower mount, and it is finished in white. No vehicle entry exists for this part number.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. Pro Comp describes its 5/8 inch chrome-hardened piston rod and Teflon rebound stop as suited to both comfortable highway driving and the most demanding conditions, and the double welded mounts add strength. The shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Stem and loop mounts explained
A stem mount is a threaded or bolted post that passes through a bracket, while a loop mount is an eye that pivots on a bolt through a bushing. Each style handles motion differently, so swapping one for the other usually means changing brackets or hardware. Knowing which mount your truck uses before buying saves time and avoids a return.
Loop bushings wear with use and can become noisy or loose, which lets the shock knock against the mount. Replacing the bushing or sleeve often restores a tight feel. When fitting a stem, use the nut and washers supplied with the shock and make sure the stem sits square in the bracket before tightening.
- Confirm the mount type before ordering
- Inspect loop bushings for wear
- Seat stem mounts square in the bracket
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325553 |
| UPC | 614901042337 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 25.22 in |
| Collapsed length | 15.22 in |
| Travel length | 10.00 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Check fit for your vehicle before ordering. Match the 25.22 in extended length and stem and loop mounts against the shock being replaced.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 325553.
Not included: the dust boot.







