Overview
The Pro Comp ZX2118 is a front Pro Runner monotube shock absorber for the 2015–2017 Ford F-150, designed for a truck at 0 inches of lift or drop, which is factory height.
The body is nitrogen gas charged. The monotube layout and nitrogen pressure reduce cavitation during compression and rebound, and the design sheds heat more efficiently than a conventional twin tube hydraulic shock. The multi-stage valving is set for the application and supports ride quality and handling.
The 2 inch body is brushed and zinc plated, with a clear coat over the finish. A rubber bushing and black polyurethane boots come with the shock, so the mounting and dust protection parts are included.
Each shock is sold as one unit, so a front pair needs two. It is a standard gas charged design for a truck that stays at factory height, and the rubber bushing and boots protect the mounting and the shaft.
Key features
- Front position, direct fit
- Nitrogen gas charged monotube
- Multi-stage valving tuned to the application
- 2 inch diameter body with brushed zinc and clear coat
- Rubber bushing and black polyurethane boots included
Choosing the right setup
Shock choice depends on how the truck is used. A stock-height F-150 that sees mostly highway and light trail work will generally keep its factory damping character, while a truck that tows or carries heavy loads puts more demand on the valving and the gas charge. Matching front and rear units keeps the ride even from one end of the truck to the other.
Parts often replaced alongside shocks include the upper and lower bushings, the mount hardware and the dust boots. Replacing them while the old shock is off reduces the chance of a noisy or loose connection later, and it gives the new unit a clean start on the same geometry.
- Match front and rear shocks for a consistent ride
- Replace worn bushings while the shock is off
- Inspect mounting hardware for corrosion
- Check boots for cracks before installing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2118 |
| UPC | 614901143997 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 0 in. lift or drop |
| Body diameter | 2 in |
| Charge | Nitrogen, gas charged |
| Finish | Brushed zinc, clear coat |
| Bushing | Rubber, included |
| Boots | Black polyurethane, included |
| Ride guarantee | 90 days |
| Warranty | Lifetime, transferable |
Vehicle fitment
It is a direct fit for the 2015–2017 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT models, at 0 inches of lift or drop.
The list covers 2015 through 2017 only, so the 2014 and 2018 and later F-150 are not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner monotube shock with rubber bushing and black polyurethane boots, sold as each.






































