Overview
The Pro Comp 922500 is a rear ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It has 22.58 inches extended and 13.71 inches collapsed, which gives 8.87 inches of travel.
It covers Chevrolet and GMC C, K and R-series trucks and Suburbans from 1977 to 1999, Chevrolet Blazers and Tahoes, Dodge Dakota and Ram 50 pickups, Ford Bronco, Bronco II, F-100, F-150, F-250, F-350 and Ranger models, GMC Jimmy, International Scout II, Isuzu Amigo, Pickup and Trooper, several Jeep models including Cherokee XJ, CJ5, CJ7, Comanche, Wagoneer and Wrangler YJ, Mitsubishi Mighty Max and Montero, Nissan Pathfinder and Toyota Land Cruiser.
Key features
- Rear position with loop mounts at both ends
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Loop mounts and bushings
Loop mounts at both ends rely on an eye that rides on a bushing or bolt, so the bushing condition matters as much as the shock itself. Over time the rubber hardens, cracks or flattens, and the eye starts to move on its fastener. That movement shows up as a clunk when the vehicle changes direction and can wear the new shock’s eyes faster.
Because the fitment spans many generations, the brackets and spacing differ between models. Compare the mount spacing on the old shock with the new one before ordering, and keep the same washers and sleeves in place. Rear shocks on older trucks also work hard on washboard roads, so inspecting the mounts at each oil change is a practical habit.
- Compare eye-to-eye spacing with the old shock
- Replace cracked or flattened bushings
- Keep original washers and sleeves
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 922500 |
| UPC | 614901071450 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 22.58 in |
| Collapsed length | 13.71 in |
| Travel length | 8.87 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 in, lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear shock for more than 80 vehicle entries, grouped by generation. Main groups are the 1977 to 1986 Chevrolet C10, C20, K10, K20 and K30 pickups with Suburbans, the 1987 to 1991 Chevrolet Blazer, the 1987 to 1991 GMC R-series and V-series trucks, the 1977 to 1996 Ford F-150, the 1980 to 1996 Ford Bronco and the 1983 to 2011 Ford Ranger.
Some entries cover a single year, such as the 1987 Chevrolet V10 or the 1980 Ford Bronco range, so confirm your exact year. Double-check the exact year and model of your vehicle before buying.
Installation notes
Loop mounts at both ends need matching loop brackets or bushings. Because the fitment spans so many models, confirm the mount spacing before ordering.
What’s included
One rear shock, sold as each. The shock boot is sold separately.























