Overview
The Pro Comp ZX2056 is a front Pro Runner monotube shock absorber for the 1997–2006 Jeep Wrangler (TJ), set up for a vehicle with a 4 inch lift. It measures 24.48 inches extended with 9.01 inches of travel, and it uses a stem upper mount with a loop lower mount.
The nitrogen-pressurized monotube body is meant to limit cavitation during compression and rebound, and it dissipates heat more efficiently than a traditional twin-tube shock. Multi-stage valving is tuned for the Wrangler application, and a boot protects the shaft. Pair it with Pro Runner control arms for the intended setup.
Key features
- Front position, direct fit
- Gas charged monotube body, nitrogen pressurized
- Vehicle specific ride tuning with multi-stage valving
- Stem upper mount and loop lower mount
- Zinc plated, clear coated finish with boot included
Front suspension basics
A front shock works with the steering geometry, the axle and the control arms, so its condition shows up in steering feel as well as ride. A monotube body with a gas charge keeps damping consistent under repeated compression. Choosing a replacement means matching the upper and lower mount styles and the installed length to the shock coming off.
Front shocks wear with the rest of the front end. Inspect the boot, the mounts and the bushings during each service, and look for oil on the body. Uneven tire wear or a loose steering feel can point to a worn front shock, so check the steering components at the same time.
- Match upper and lower mount styles
- Check steering components with the shock
- Look for oil on the body
- Inspect the boot after trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2056 |
| UPC | 614901024593 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | Designed for a 4 in. lift |
| Extended length | 24.48 in |
| Collapsed length | 15.48 in |
| Travel length | 9.01 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Body | Monotube, gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc plated, clear coated |
| Boot | Included |
Vehicle fitment
The ZX2056 is a direct fit for the 1997 to 2006 Jeep Wrangler (TJ) and is designed for a 4 inch lift. Its fit covers the TJ across its full model run, so it suits a TJ from 1997 through 2006 with that lift.
The list does not include the 2004–2006 Wrangler LJ, which uses a different Pro Comp part for the same lift. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount are different styles, so confirm the front shock mounting points on your Wrangler accept both before installation.
What’s included
One front Pro Runner monotube shock with boot, sold as each.



























