Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 929553

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES9000 shock 929553 with 29.77 inch extended length
  • Twin tube, 10-stage velocity sensitive valving
  • Factory upper and lower mounts, white finish
  • Sold as each, no boot or remote reservoir

Description

Overview

The Pro Comp 929553 is an ES9000 shock with a twin tube design and 10-stage velocity sensitive valving. Pro Comp built the ES9000 as a nitrogen gas charged shock for owners who carry heavy loads and drive in demanding conditions.

This version measures 29.77 inches extended, 17.09 inches collapsed and 12.68 inches of travel. It uses factory mounts at both ends and is sold as each.

Key features

  • Twin tube construction with nitrogen gas charge
  • 10-stage velocity sensitive valving
  • Nylon banded piston head and double welded mounts
  • Factory upper and lower mounts
  • White finish

Choosing a replacement shock

When replacing a shock, the main job is matching the working length to the original so the suspension can move through its normal range. Measuring the old shock fully extended and collapsed gives a useful comparison. A shock that is too long can strain the mounts, while one that is too short can limit travel and bottom out on hard compressions.

Twin tube shocks like this one are a common choice for trucks that carry loads and see mixed roads. Their damping is set by the valving inside, so there is no external adjustment to tune. Pair the shock with bushings in good condition, and check the springs and bump stops if the truck still sags or hits the stops.

  • Measure the old shock extended and collapsed
  • Check factory mounts for cracking or wear
  • Inspect bump stops when replacing shocks

Specifications

Brand Pro Comp Suspension
Part number 929553
UPC 614901696585
Series ES9000
Extended length 29.77 inches
Collapsed length 17.09 inches
Travel 12.68 inches
Mounts Factory upper and lower
Adjustable No
Finish White

The 929553 is listed with a 29.77 inch extended length, 17.09 inch collapsed length and 12.68 inches of travel. Those figures are close to the other ES9000 shocks in this set, so the length check against the existing shock is the important step. The shock uses factory mounts, which keeps the installation simple when the original mounts are in good shape.

The 10-stage valving gives the shock a controlled feel over bumps while keeping highway ride comfortable.

Vehicle fitment

Check the mounting points and length against your truck before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock. No boot is included.

SKU: EXP929553 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

How long is the Pro Comp 929553 shock when extended?

It is 29.77 inches extended and 17.09 inches collapsed, giving 12.68 inches of travel. Measure the shock you are replacing to confirm that these lengths fit your truck.

Does the 929553 come with a boot?

No. The shock is sold without a boot, and it has no remote reservoir. It is finished in white and sold as each.

Which mounts does the 929553 use?

It uses factory upper and lower mounts. Check that the original mounting points are in good condition before installing the new shock.

Can a twin tube shock be adjusted later?

No. This shock is not adjustable, so its damping stays as built. Changing the feel would take a different shock with external adjustment, and that shock should be checked for length and mounts before ordering.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon