Overview
The Pro Comp ZX2061 is a rear Pro Runner monotube shock absorber for the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ). It is designed for a vehicle with a 4 inch lift. The shock measures 23.44 inches extended and offers 8.29 inches of travel, with loop mounts at both ends.
The shock is a gas-charged monotube, with the body pressurized with nitrogen to prevent cavitation during compression and rebound. This design dissipates heat more efficiently, which reduces fade on rough terrain. Each shock is tuned with multi-stage valving for the vehicle it is built for, and a boot protects the shaft from grit.
The ZX2061 is the 4 inch lift version of the rear shock in this Pro Runner group, with 23.44 inches extended and 8.29 inches of travel. A monotube keeps the oil and nitrogen charge in one body, separated by a floating piston, so the oil stays under pressure when the suspension is worked hard on rough ground.
Key features
- Rear position, direct fit
- Gas charged monotube with nitrogen pressurization
- Multi-stage valving for ride quality and handling
- Loop upper and lower mounts
- Zinc plated, clear coated body with boot
Rear shock mounting and clearance
Clearance matters more on a rear shock than many owners expect. As the axle moves, the shock body, bump stops and brake lines can meet, so check the clearance by compressing the rear suspension slowly. Loop eyes at each end should sit square on their pins without rubbing against the bracket or axle.
The rear boot keeps grit off the shaft and seal, which is useful on trails. Inspect it regularly for splits, since a damaged boot allows dirt to reach the moving parts. A boot in good shape helps the shock keep its damping over time.
- Compress the suspension slowly to check clearance
- Look for rubbing on loop eyes
- Inspect the boot for splits
- Recheck mounts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2061 |
| UPC | 614901024647 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | Designed for a 4 in. lift |
| Extended length | 23.44 in |
| Collapsed length | 15.15 in |
| Travel length | 8.29 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Body | Monotube, gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc plated, clear coated |
| Boot | Included |
Vehicle fitment
It is a direct fit for the 2004 to 2006 Jeep Wrangler LJ and the 1997 to 2006 Jeep Wrangler TJ, both designed for a 4 inch lift.
The list does not include the Wrangler JK or JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop mounts, so check that the rear mounting points on the Wrangler are loop style before fitting. The shock is designed for a 4 inch lift, so the vehicle’s lift should match that figure.
What’s included
One rear Pro Runner monotube shock with boot, sold as each.





























