Overview
The Pro Comp Suspension ES3000 324515 is one hydraulic shock absorber from the ES3000 Series, sold individually. It measures 24.70 in extended and 14.52 in collapsed, with 10.18 in of travel. It has a stem mount at the top and a loop at the bottom, and it is finished in white. No vehicle is named for this part number.
The twin tube cellular gas body carries 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built for comfortable highway driving and demanding conditions. Double welded mounts are fitted, and the shock is covered by the Pro Comp Suspension limited lifetime warranty. The lengths are vehicle specific, so compare them with your current shock.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- White finish, non-adjustable
- Sold individually
Replacing one shock at a time
Replacing one shock while the other side is still in service is common, but the two units can end up with different damping. A new shock may feel firmer than an older one, which can make the axle feel uneven over bumps. Inspecting the remaining shock before buying is a sensible first step.
The stem upper and loop lower mounts put the shock at a specific angle. Before fitting, compare the old shock’s stem and loop positions with the new one, and check that the bushings are not split. The rod should move smoothly through its full travel with no binding, and the body should be free of dents.
- Inspect the opposite shock before buying
- Compare stem and loop positions with the old unit
- Check bushings for splits or flattening
- Test the rod for smooth movement through full travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324515 |
| UPC | 614901042054 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 24.70 in |
| Collapsed length | 14.52 in |
| Travel length | 10.18 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the 24.70 in extended length and the stem and loop mounts against your current shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 324515, sold individually.
Not included: the dust boot.
















