Overview
The Pro Comp Pro Runner ZX2024 is a rear gas-charged monotube shock absorber for the 2007 to 2013 Toyota Tundra. It has a stem-style upper mount and a loop-style lower mount, and it covers a lift of 0 to 2.5 inches. It measures 24.35 inches extended, 15.34 inches collapsed and 9.01 inches of travel.
The Pro Runner monotube is tuned for late-model trucks, Jeeps and SUVs, with multi-stage valving developed through dyno and real-world testing. The nitrogen-charged, zinc plated body reduces cavitation and shock fade, and the design suits towing and rough desert driving.
The 0 to 2.5 inch lift range and 9.01 in. of travel are the figures to check against your truck. The stem upper mount sits at the top and the loop lower mount at the bottom. Zinc plating is a common protective finish on steel shock bodies, and this body is zinc plated and clear coated.
Key features
- Rear placement for the Tundra
- Stem upper mount and loop lower mount
- Multi-stage valving
- Nitrogen charged, zinc plated and clear coated
- Boot included
Towing and rough terrain use
Trucks that tow or carry heavy loads put sustained stress on rear shocks, and that stress is what causes fade on long grades. A shock with a nitrogen-charged body keeps the oil under pressure, which helps damping stay more consistent when the shock is worked hard over and over.
Desert and rock-strewn trails push a shock through long strokes and sharp impacts. Over time the lower loop bushing and the upper stem mount can loosen, so the shock should be checked alongside the rest of the rear axle hardware. Tire pressure and cargo weight also change how much work the shock does, so adjust them for the terrain.
- Keep the load within the truck’s rating
- Check the lower loop bushing for wear
- Re-torque mount bolts after the first few trail runs
- Replace rear shocks in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2024 |
| UPC | 614901024272 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 0 to 2.5 in. |
| Extended length | 24.35 in. |
| Collapsed length | 15.34 in. |
| Travel | 9.01 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 2007–2013 Toyota Tundra, including the Base, Limited, Platinum and SR5 models.
Tundra model years outside 2007–2013, and other Toyota trucks, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the stem upper and loop lower mounts on your Tundra match this shock, and confirm the 0 to 2.5 inch lift range before fitting.
What’s included
One rear monotube shock, with a boot.



























