Overview
The Pro Comp Pro Runner part ZX2025 is a gas-charged monotube shock absorber with a stem-style upper mount and a loop-style lower mount. It measures 24.33 inches extended, 15.72 inches collapsed and 8.61 inches of travel, and the specification entry marks it as not adjustable.
Pro Runner monotube with a nitrogen charge, built for late-model trucks, Jeeps and SUVs. It has vehicle-specific ride tuning and multi-stage valving. Its brushed, zinc plated, clear coated body is designed to limit cavitation during compression and rebound and to shed heat efficiently.
The position and lift range are not known for this part, and no vehicle is named. Confirm the position and fit for your year, model and trim before ordering. Check the stem upper and loop lower mounts, the 8.61 in. of travel and the zinc finish against the shock being replaced.
Key features
- Stem upper mount and loop lower mount
- Monotube body with a nitrogen charge
- Multi-stage valving
- Zinc plated, clear coated finish
- Boot included
Matching the old shock
Replacing a shock works best when you measure the old unit before ordering. Record the extended length, the collapsed length and the travel, then note whether the upper and lower mounts are stem or loop style. Matching those dimensions and mount types keeps the ride height and geometry close to what the truck was built with.
Check the shaft, boot and body of the old shock for oil, dents or grit damage, since those signs point to the wear the replacement is meant to fix. Replace the bushings or hardware if they are cracked, and make sure any new shock is installed with the same orientation as the one removed.
- Measure eye-to-eye at full extension
- Note stem or loop mount style
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2025 |
| UPC | 614901024289 |
| Shock series | Pro Runner |
| Extended length | 24.33 in. |
| Collapsed length | 15.72 in. |
| Travel | 8.61 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
Check fit against your truck’s year and trim before buying, since no vehicle is named for this part number.
Installation notes
Confirm front or rear placement, and the stem and loop mounts, against the shock being replaced before installing.
What’s included
One zinc-finished monotube shock, with a boot.




























