Overview
The ICON V.S. 2.5 Series Piggyback Front Shock Kit, part number ICO37705P, is a piggyback shock for 1999–2022 Ford F-250 and F-350 Super Duty trucks. Confirm the mounting position for your truck before ordering.
The shock has a billet aluminum manifold a few inches below the top cap that forms an internal bump zone. The bump zone adds about 20% more damping force, which helps prevent harsh bottom-outs and controls the suspension at high compression speed. Each shock is configured for its application in length and damping tune and can be rebuilt and revalved.
Confirm the mounting position before ordering, since it determines which end of the truck the shock installs on.
The bump zone is formed by a billet aluminum manifold a few inches below the top cap. It adds about 20% more damping force, and the shock is configured for each application in length and damping tune.
Key features
- Internal bump zone formed by a billet aluminum manifold.
- About 20% additional damping force in the bump zone.
- Helps limit bottom-outs at high compression speed.
- Configured for each application in length and damping tune.
- Rebuildable and revalveable.
Bump zone tuning tips
A bump zone works in the last part of compression, when the suspension is near its travel limit. On a heavy-duty truck like a Super Duty, that end of travel is where a loaded truck can feel harsh, so extra damping in that range can make hard hits feel more controlled. The effect depends on the spring rate, the load and how the bump stops are set up.
If you change springs, add a lift, or carry heavier loads, the bump zone may need retuning. A revalveable shock gives you that option without replacing the unit. Before adjusting, record the current settings so you can return to a known baseline, and make changes in small steps.
Check the bump stops and mounting hardware during service, since worn stops change how often the bump zone engages.
- Note the current setting before changing it
- Make one change at a time
- Retest on a familiar road
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO37705P |
| Shock series | 2.5 Piggyback Reservoir |
| Shock type | Monotube |
| Bump zone damping increase | About 20% |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits 1999–2022 Ford F-250 Super Duty and 1999–2022 Ford F-350 Super Duty models across their trim levels. It does not fit the F-150.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock with the piggyback layout. Check the mounting hardware against your truck’s mounts first.