Overview
The Daystar 2 inch Coil Spring Spacers (part number KC09139BK) give 2 inches of lift at the front and rear of the Ram 1500. They fit the 2017–2019 Ram 1500 4WD with non-air-ride suspension in both the new DT and classic DS body styles.
The upper coil and strut spacers are made from high-density progressive polyurethane and are designed to keep a near-factory ride. Rebel models are excluded, so confirm the trim before ordering.
Key features
- 2-inch lift at the front and rear
- Fits both the DS and DT body styles
- High-density progressive polyurethane
- No strut disassembly required
- No metal-on-metal contact
- Installation takes 1 to 2 hours.
- Limited lifetime warranty from Daystar
Polyurethane spacers and ride
Polyurethane spacers add height by sitting between the body and the factory coil springs, so they keep the springs and struts in their original positions. Because nothing is cut or replaced, the job is mostly a matter of lifting, positioning and tightening. Polyurethane handles compression differently from steel, so a spacer can feel firmer over sharp bumps than a stock part.
Before you buy, check the rear suspension type and the body style. A spacer made for one body style may not sit square on the other, so confirm the model year and cab style on your truck. Air-ride trucks use a different setup entirely and need a different kit.
After installation, check the alignment, look at the tires for even wear, and recheck the bolts on the strut tops after the first few drives. Upper components can settle slightly once the new spacers are seated. Also check the steering for any change in feel at highway speeds.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KC09139BK |
| Type | Front and rear |
| Lift height | 2 inches |
| Material | High-density progressive polyurethane |
| Suspension | Non-air-ride |
| Body styles | DS (classic) and DT (new) |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
Daystar lists these spacers for the 2017–2020 Ram 1500 in its Big Horn, Express, Laramie, Laramie Longhorn, Limited, Lone Star, Special Service, Sport and Tradesman models, plus the SLT.
Rebel models are excluded, so confirm the trim before ordering. Air-ride suspension is not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes 1 to 2 hours. The spacers sit above the factory coil springs, so set the front and rear alignment afterward.
What’s included
Front and rear upper coil and strut spacers. Confirm the hardware on hand matches your installation before starting.










