Select your vehicle
-13%

Pro Comp 2.5″ Nitro Level Lift Kit – 62214K

Pro Comp Suspension

Shop Ford F-150 Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2021–2026 Ford F-150.
  • 2.5-inch front lift with strut spacers
  • Rear lift with lift blocks and U-bolts, where applicable
  • No bump stops included
  • Part number EXP62214K (62214K)

Description

Overview

The Pro Comp EXP62214K, also written 62214K, is a Nitro leveling kit for the 2021–2026 Ford F-150. It gives 2.5 inches of lift in the front and 1.5 inches in the rear, using strut spacers at the front and lift blocks with U-bolts at the rear.

Pro Comp describes Nitro kits as an economical alternative to a complete suspension system. The strut spacers are used to lift the front, which Pro Comp says keeps the factory steering geometry in place and preserves factory ride quality and handling.

The rear lift is achieved with lift blocks, which the specifications list as the rear lift method where applicable. The kit is aimed at owners who want room for larger aftermarket wheels and tires without a full suspension lift.

Key features

  • 2.5 inches of front lift with strut spacers
  • 1.5 inches of rear lift with lift blocks and U-bolts
  • The strut spacer approach keeps the factory steering geometry in place.
  • Direct fit to the listed 2021–2026 F-150 trucks
  • Black finish

Before you install

Nitro kits raise the front with spacers and leave the control arms, steering links and axle alignment largely untouched, which is why they are a common choice for owners who want more clearance without a full suspension rebuild. Because the front is raised more than the rear, the truck’s stance changes, and the new height should be checked against the tires and fender clearance before the first long drive.

Before buying any leveling kit, match the lift to how the truck is used. A kit that suits daily driving may not leave enough room for a heavy winch or a large set of tires. Check the front and rear heights you actually need, and keep the old spacers or shocks until the new setup has been driven. Re-torque the rear U-bolts after the first few drives and inspect the bushings for wear, since small changes in angle add stress over time.

Specifications

Brand Pro Comp Suspension
Part number EXP62214K (62214K)
Kit type Nitro leveling kit
Front lift height 2.5 inches
Front lift method Strut spacers
Rear lift method Lift blocks and U-bolts, where applicable
Bump stops None
Finish color Black
Fitment type Direct fit

Vehicle fitment

It fits the 2021–2026 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.

Earlier F-150 years and the 2023 and newer models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Strut spacers and rear lift blocks change the ride height without a full arm system, so the alignment and the rear U-bolt torque should be checked after the install.

What’s included

The specifications list strut spacers at the front and lift blocks with U-bolts at the rear where applicable. No bump stops are included.

Not included: bump stops, which the specifications mark as none.

Fitment

VehicleYearsTrims
Ford F-1502021–2026King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp EXP62214K fit a 2022 Ford F-150?

Yes. It fits the 2021–2026 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.

How much lift does this kit give?

It gives 2.5 inches of front lift and 1.5 inches at the rear, using strut spacers at the front and lift blocks at the rear.

Does it keep the factory steering geometry?

Yes. The strut spacer approach keeps the factory steering geometry in place, so the front lift does not change it.

How often should the leveling kit be inspected?

Inspect it after the first few drives and then at regular service intervals. Look for loose U-bolts, worn bushings and any sign of contact between the tires and the fender or inner liner. Recheck the alignment if the truck pulls or the tires wear unevenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Leveling Kits on Amazon