Overview
The Rancho Rear Coil Spring Spacers, part number RS70404, level a Ram 1500 DT by adding 1.5 inches at the rear. The kit is application-specific and includes two spacers. It fits the 2019–2021 Ram 1500 in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Special Service, TRX, TRX Launch Edition and Tradesman trims.
Air-ride models are not covered. Confirm fit for a TRX trim before ordering, because TRX trims need a separate check.
Key features
- Two rear coil spring spacers
- 1.5 inch rear level
- Application-specific design for the Ram 1500 DT
- Rancho limited lifetime warranty
Rear lift and load
Raising the rear with coil spacers changes the rear ride height and the position of the rear axle under the body. Heavier loads can settle the rear back down, so the height should be checked both empty and loaded. Rear shocks sized for the stock height may need extra length to reach their mounts at the new height.
Coil spacers keep the factory springs in place, so the rear spring rate is unchanged. Inspect the rear shocks, bump stops and brake lines for stretch or rubbing after fitting. Re-check the rear height after the first few trips, since the springs can settle as they take their new position.
- Check rear height empty and loaded
- Inspect the brake lines for stretch or rubbing
- Recheck the height after the first few trips
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS70404 |
| Position | Rear |
| Lift height | 1.5 inches |
| Quantity | Two spacers |
Vehicle fitment
It fits the 2019–2021 Ram 1500 in the trims in the overview, including the TRX and TRX Launch Edition.
Ram 1500 years outside 2019–2021 are not covered. Air-ride models are not covered by Rancho’s application notes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are rear spacers, so the front height is not changed. Rancho suggests pairing them with its rear shocks, RS55072 or RS999072, for a complete rear upgrade.





