Overview
The Pro Comp 52298B is an adjustable front track bar for 2017-2022 Ford F-250 and F-350 Super Duty trucks. Its high-clearance design fits vehicles with 0 to 4 inches of lift using the OEM track bar mount, and vehicles with 5 to 8 inches of lift using a track bar relocation bracket.
The bar is built from 1.5-inch by 3/8-inch wall DOM steel to resist deflection from oversized tires or heavy side loads. An adjustable sleeve sets axle alignment while the bar stays on the vehicle, so the suspension does not need to be taken apart for adjustment.
The bar includes an OE style heavy duty bushing and ball joint. It has a zinc coated and powder coated finish for corrosion resistance and smooth thread engagement, with clearance through the full suspension cycle.
Key features
- Adjustable sleeve for axle alignment with the bar still installed
- 1.5-inch by 3/8-inch wall DOM steel construction
- OE style heavy duty bushing and ball joint
- High-clearance design for 0 to 4 inches of lift with the OEM track bar mount
- Track bar relocation bracket needed for 5 to 8 inches of lift
- Zinc coated and powder coated finish
Alignment after installation
A track bar sets the lateral position of the axle, so any change to its length moves the axle and the steering geometry. Alignment should be checked once the truck is back on its wheels and the bar is at its final length. Uneven tire wear at the front is often the first sign that the setting is off.
The bushing and ball joint carry the sideways load on every turn and bump. Inspect them at regular service intervals, looking for cracked rubber, play at the joint or a loose sleeve. Replacing a worn ball joint early limits damage to the bar and the axle mount.
- Check bushing and ball joint play at regular service
- Re-check alignment after any change to the bar length
- Look for cracked rubber or a loose sleeve clamp
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 52298B |
| Position | Front |
| Lift height | 0 to 8 inches (relocation bracket for 5 to 8 inches) |
| Material | DOM steel, 1.5-inch by 3/8-inch wall |
| Adjustment | Adjustable sleeve |
| Bushing | OE style heavy duty |
| Ball joint | Heavy duty |
| Finish | Zinc coated and powder coated |
| Fitment | Direct fit |
Vehicle fitment
The 52298B covers the 2017-2022 Ford F-250 Super Duty and F-350 Super Duty, in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims. Confirm your vehicle’s year, model and trim before ordering.
The list does not include Super Duty trucks from before 2017, or the F-450 and F-550 models.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjustable sleeve sets axle alignment while the bar is still on the vehicle. Vehicles with 5 to 8 inches of lift need a track bar relocation bracket for this bar. Have the alignment checked after installation, because adjusting the track bar changes the axle position.
What’s included
The front track bar with its OE style heavy duty bushing and ball joint.














