Overview
The Rubicon Express adjustable rear track bar (part RE1672) replaces the stock rear track bar on 2-door and 4-door Jeep Wrangler JL models with stock height and up to 5.5 inches of lift. A track bar, also called a Panhard bar, controls side-to-side movement of the axle.
The bar is made from heat treated 4130 Chromoly steel and is designed to resist deflection from oversized tires or extreme side loads. The length is adjustable, and the double bend gives more clearance between suspension components on the JL.
Key features
- Heat treated 4130 Chromoly steel construction
- Adjustable length
- Double bend for clearance between suspension components
- Designed to resist deflection from oversized tires or side loads, per the maker
- Rear location with a listed lift height range of 3.5 to 4.5 inches
Track bar geometry and setup
A rear track bar keeps the axle centered under the body, so side-to-side movement stays controlled as the suspension travels. When a lift changes the arc of the control arms, the bar’s angle changes too, which is why length and mounting position matter. An adjustable bar gives a way to fine-tune axle centering after the rest of the suspension is installed.
Bushings and mounting hardware carry the load at each end of the bar. Inspect them for cracks, looseness or wear at regular intervals, especially on trails where the axle moves hard. If the bar is replaced, check that the axle sits centered between the wheel wells before driving the vehicle at speed.
- Check bar ends for play by hand at each service
- Inspect the bushings for cracking or wear
- Confirm the axle is centered after any adjustment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1672 |
| Location | Rear |
| Material | Heat treated 4130 Chromoly steel |
| Length | Adjustable |
| Lift height (listed) | 3.5 to 4.5 inches |
| Clearance | Double bend for JL suspension components |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler JL models in the 2-door and Unlimited 4-door bodies, including the Rubicon, Sport, Sport S, Moab and Sahara versions.
It does not fit the Jeep Wrangler JK (2007–2018), the Gladiator or earlier Wrangler generations. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bar replaces the stock unit and is adjustable, and the lift changes axle position. Have the alignment checked after installation.
What’s included
The package is the adjustable rear track bar. Check the package contents against your installation before starting.












