Overview
The Pro Comp 924506 is a rear ES9000 Series gas charged shock absorber for the 1980 to 1985 Toyota Pickup, sold individually. It fits the Base, DLX, DLX Turbo, SR5 and SR5 Turbo versions.
Pro Comp rates this shock for a 2.5 to 3 inch lift. The reference lengths are 24.84 inches extended and 14.82 inches collapsed, but the lengths are vehicle specific, so measure the stock rear shock before ordering. Both mounts are factory style, and the twin tube body uses a nylon banded piston head with 10 stage velocity sensitive valving.
Key features
- Rear position for the 1980 to 1985 Toyota Pickup
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Choosing a lift height
A 2.5 to 3 inch lift changes the geometry of the rear suspension, so the shock must extend and compress through a different range than stock. Check that the old lengths and the lifted ride height leave enough room at full droop and full compression. Coil springs and leaf packs are often changed alongside shocks on lifted trucks, because they set the ride height the shock works against.
On older Toyota Pickups, the factory mounts are generally kept, so the new shock installs where the old one sat. Inspect the mount bushings and bolts when the old unit comes out, since rust and wear are common on trucks of this age. Re-check fasteners after the first few drives.
- Measure the stock shock before choosing a replacement
- Inspect factory mount bushings for wear
- Check rear height against the 2.5 to 3 inch rating
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924506 |
| UPC | 614901071818 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | Vehicle specific (reference 24.84 in) |
| Collapsed length | Vehicle specific (reference 14.82 in) |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 2.5 to 3 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1980 to 1985 Toyota Pickup in Base, DLX, DLX Turbo, SR5 and SR5 Turbo versions.
Later Toyota Pickup and Tacoma generations are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the stock rear shock before ordering, because the lengths vary by vehicle. The 2.5 to 3 inch lift rating is the figure to check against your rear height.
What’s included
One rear shock, sold as each, with no boot.










