Overview
The Pro Comp Pro Runner Monotube Shock Absorber, part number ZX2058, is a rear gas charged monotube shock for the 2007-2013 Toyota Tundra. It is designed for vehicles with a 4-inch lift.
In a monotube design, one pressure tube holds the oil and a floating piston keeps the nitrogen charge separate from it. Stem mounts use a threaded stud at the top, and loop mounts use an eye at the bottom, so compare the mount types with your existing shock.
The line is built for late model trucks, Jeeps and SUVs. The nitrogen charge reduces cavitation during compression and rebound, and the multi-stage valving is tuned for ride quality and handling.
The company names towing and desert whoops among the uses it has in mind for the shock.
Key features
- Rear position, gas charged monotube design
- Nitrogen charge helps reduce cavitation.
- Multi-stage valving for ride quality and handling
- Stem upper mount and loop lower mount
- Boot included
Toyota Tundra shock care
The rear shock on a Tundra carries the axle’s motion over bumps and keeps the tires in contact with the ground. When a lift raises the rear, the shock’s extended length and mount positions matter more than they do at stock height, so confirm the lift before ordering. Stem upper mounts and loop lower mounts need different hardware, so keep the original bushings and studs in mind.
Replace rear shocks in pairs to keep the rear end level. After towing or desert running, inspect the body for oil, the boot for tears, and the mounts for cracked bushings. Loose stem nuts should be retightened after the first few drives. A shock that bottoms out often may need a bump stop check as well.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2058 |
| UPC | 614901024616 |
| Series | Pro Runner |
| Position | Rear |
| Extended length | 29.38 inches |
| Collapsed length | 18.15 inches |
| Travel length | 11.23 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height | Designed for a 4-inch lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Hydraulic or gas charged | Gas charged |
| Boot | Included |
| Sold as | Each |
Vehicle fitment
It fits the 2007-2013 Toyota Tundra only. Other Tundra years and Toyota models are outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is designed for a 4-inch lift, so confirm your suspension matches that lift height before ordering. Compare the 29.38-inch extended and 18.15-inch collapsed lengths with your current shock as well.
What’s included
One rear shock absorber with boot, sold as each under part number ZX2058.



























