Overview
The ES3000 shock absorber, part number 329514, is a factory-mount replacement with vehicle-specific lengths. Confirm the match against the shock you are replacing before ordering.
The design is twin-tube and gas-charged. The 10-stage velocity-sensitive valving controls how the shock responds to movement, and the 5/8 inch chrome-hardened piston rod handles the load. The Teflon rebound stop limits the top of the return stroke.
Whether the mounts line up depends on the year and model of your truck.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- Warranty coverage is limited lifetime from Pro Comp Suspension.
Why gas charge matters
A gas-charged body keeps pressure on the oil so the damping holds steady when the shock heats up during long descents or repeated bumps. Without that pressure, oil can foam, and damping drops off sharply. The 10-stage valving controls how the oil moves through the piston, so rebound and compression stay balanced at different speeds.
When a gas-charged shock fails, the usual sign is a bouncy ride that does not settle, not a dramatic failure. Look at the body for oil and inspect the mounts, bushings and the rebound stop. Replacing both shocks on an axle keeps the two sides matched, and it is worth checking the springs and bump stops during the same job.
- Oil on the outside of the body
- Bouncing after a single dip
- Worn or cracked mount bushings
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329514 |
| UPC | 614901042856 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Fit for part 329514 depends on the vehicle. Check your truck’s year, model and trim, and compare the original shock’s length and mounts before buying.
With vehicle-specific lengths, the same part number can differ in fit between trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the shock you are removing at both mounts, then compare those measurements with the vehicle-specific lengths before you buy.
What’s included
One ES3000 shock absorber.
Not included: the dust boot. The shock is sold without one.












