Select your vehicle

Pro Comp Black Series 2.75 Coilover Shock Absorber – ZX4002

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ZX4002 Black Series 2.75 coilover shock for the front
  • Raises the front up to 2.5 inches
  • Gas charged monotube with 2.75-inch zinc plated body
  • Sold individually

Description

Overview

The Pro Comp ZX4002 is a Black Series 2.75 front coilover shock. It is a hand assembled, adjustable monotube coilover that raises the front suspension up to 2.5 inches. Pro Comp designed it to pair with its Pro Runner control arms.

Each unit is valved and tuned for its application, which Pro Comp says gives a smooth ride on and off road. The coilover is gas charged and sold individually.

Key features

  • Hand assembled adjustable monotube coilover
  • Oversized 2.75-inch zinc plated body with increased oil capacity for cooler operation
  • Heavy-duty spherical bearings at the upper and lower mounts
  • Valved and tuned for each application

Setting ride height and damping

A coilover controls both spring rate and damping, so the ride height and the shock setting should be adjusted together. Set the height first with the truck loaded as it normally runs, then check that the shock has enough compression and extension travel at both ends. Bump stops and the sway bar should be considered at the same time, since they change how the front suspension feels at full travel.

Replacing front shocks in pairs keeps the two sides matched. Mixed damping can pull the truck to one side and make braking feel uneven. After any lift, have the alignment and driveline angles checked, since front height changes the geometry of the steering and axles.

  • Set height with the truck loaded as usual
  • Check compression and extension travel
  • Review bump stops and sway bar together
  • Replace front shocks in matched pairs

Specifications

Brand Pro Comp Suspension
Part number ZX4002
UPC 614901147681
Position Front
Lift range 0 to 2.5 inches
Body 2.75-inch zinc plated
Type Coilover, adjustable monotube
Charge Gas charged
Mounts Heavy-duty spherical bearings
Sold as Each

Vehicle fitment

It is part of the 2.75 Black Series. Confirm fit for your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Front lift up to 2.5 inches changes the alignment and the driveline angles, so have both checked once the coilover is in.

What’s included

One Black Series 2.75 coilover shock.

SKU: EXPZX4002 Category:

Specification

Shipping weight 24.00 lbs
Package dimensions 36.00 × 6.00 × 6.00 in
brands

Questions & Answers

How much lift does the Pro Comp ZX4002 coilover give?

It is rated for 0 to 2.5 inches of front lift, depending on the application it is tuned for. The coilover is tuned to suit the truck it is installed on, so the lift and ride should be checked after fitting.

Is the ZX4002 gas charged?

Yes. It is a gas charged adjustable monotube coilover with a 2.75-inch zinc plated body. The larger body gives more oil capacity, which Pro Comp says helps the shock run cooler.

Is the ZX4002 sold in pairs?

It is sold individually, so one is needed for each front corner of the truck. Matching both sides keeps the damping and the height the same on each wheel.

Should both front coilovers be replaced together?

Usually, yes. Replacing only one side leaves the two front corners with different damping and height. Matching the pair keeps the truck balanced over bumps and under braking.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon