Overview
The Pro Comp 926500 is a rear ES9000 Series gas charged shock absorber with a twin tube body, sold individually. Pro Comp rates it for a 4 to 6 inch lift. The reference figures are 25.99 inches extended and 15.39 inches collapsed.
Lengths for this rear shock depend on the vehicle, so measure the stock rear shock on your truck and compare it with the reference lengths before ordering.
Key features
- Rear position with factory-style upper and lower mounts
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Setting rear ride height
Rear shocks influence ride height as much as ride quality, because they work with the springs and load on the axle. A shock that is too short can leave the rear sitting high or stressing the mounts, while one that is too long can cause the axle to hang under load. Checking the stock height before a change keeps the suspension within its intended range.
Rear shocks also wear alongside the leaf or coil springs they sit beside. When one shock is replaced, its counterpart often shows similar wear, so inspecting both helps keep the rear end level. Load changes, towing and trail use all push the shock harder, and frequent heavy loads shorten the life of worn damping.
- Compare the stock rear height
- Check bump stops for cracks
- Inspect the springs and shackles
- Look for fluid on the shock body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926500 |
| UPC | 614901072334 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | Vehicle specific (reference 25.99 in) |
| Collapsed length | Vehicle specific (reference 15.39 in) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 4 to 6 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Measure the stock rear shock before choosing this length, since the right length depends on the vehicle. Check the fit for your truck before buying.
The 4 to 6 inch lift range is wide, so confirm the lift on your truck is inside it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lengths are vehicle specific, a measured comparison with the stock shock is the safest first step before buying.
What’s included
One rear shock, sold as each, without a boot.























