Overview
The Pro Comp ES9000 Series shock absorber, part number 926560, is a nitrogen gas charged twin tube shock sold as one each. It has a 27.07-inch extended length, a 15.94-inch collapsed length and 11.13 inches of travel.
The ES9000 uses 10-stage velocity sensitive valving and a 1-3/8-inch nylon banded full displacement piston head. Its shock mounts are double welded for strength. It is built for heavy loads and demanding driving. The shock has factory upper and lower mounts and is not adjustable. It has no remote reservoir and comes in a white finish, without a boot.
Key features
- Nitrogen gas charged twin tube design
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
- Not adjustable, no remote reservoir
Heavy-duty shock use
A shock built for heavy loads works hardest on long descents, washboard roads and sustained off-road driving. Heat builds in the oil and gas chamber under these conditions, and that heat can reduce damping. A nitrogen charge helps keep the oil from aerating, which supports steady control over rough sections.
After heavy use, inspect the shock for leaks, dents on the body and any discoloration from heat. Keep the factory mounts tight and check for cracks around them. If the shock feels weak or bouncy after a long run, replace it rather than relying on it for control.
- Inspect the body for leaks after heavy use
- Check factory mounts for cracking
- Watch for reduced damping after long descents
- Replace paired shocks together
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926560 |
| UPC | 614901697797 |
| Shock series | ES9000 |
| Extended length | 27.07 in |
| Collapsed length | 15.94 in |
| Travel length | 11.13 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Gas charge | Nitrogen |
| Boot | Not included |
| Sold as | Each |
Vehicle fitment
Check the mounting points and length against your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 27.07-inch extended and 15.94-inch collapsed lengths with the shock you are replacing.
What’s included
One shock absorber.
Not included: A boot.







