Overview
It is a hydraulic shock absorber for the front outer position on Chevrolet and GMC compact trucks and SUVs. It fits the 1973–1974 and 1987–1991 Chevrolet Blazer, the 1975–1986 Chevrolet K5 Blazer and the 1973–1991 GMC Jimmy, and it uses the factory upper and lower mounts.
The shock’s extended, collapsed and travel lengths are set to the vehicle rather than a fixed figure. Pro Comp’s cellular gas twin tube is paired with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Pro Comp says these parts give comfortable highway driving and demanding use, and the double welded mounts and limited lifetime warranty complete the package.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Front outer position
- Pro Comp Suspension limited lifetime warranty
Blazer shock upkeep
Older Blazers and Jimmys often sit in areas where road salt and moisture build up around the suspension. Rust on the mounting brackets and hardware is common, and it can make a shock difficult to remove or seat correctly. Cleaning the mounts and applying a suitable protective coating during the install helps the hardware last longer.
Because these trucks may have been driven for many years, it is worth checking the whole front end when a shock is replaced. Look at the control arm bushings, steering components and the spring seats. A new shock is easier to judge when the rest of the front suspension is tight and free of wear.
- Clean mounting brackets and hardware
- Check control arm bushings
- Inspect spring seats for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326502 |
| UPC | 614901042436 |
| Shock series | ES3000 |
| Position | Front outer |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1973–1974 and 1987–1991 Chevrolet Blazer (Base, Custom Deluxe, Scottsdale and Silverado), the 1975–1986 Chevrolet K5 Blazer (Base, Cheyenne, Custom, Custom Deluxe, Deluxe, Scottsdale and Silverado) and the 1973–1991 GMC Jimmy (Base, High Sierra, Sierra Classic and Sierra Grande).
Chevrolet Blazers from 1975 to 1986 that are not K5 models, and GMC Jimmys from 1992 and later, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the mounting location on your vehicle before ordering, since this is a front outer shock. Measure the shock being replaced, as the lengths are vehicle specific.
What’s included
One shock absorber, part 326502.
Not included: the dust boot.











