Overview
The Pro Comp Suspension ES3000 321523 is a rear hydraulic shock absorber from the ES3000 Series. It is rated for 0 to 1 in. of lift and uses the factory upper and lower mounts, so the shock is matched to the vehicle’s own mounting points. No make, model or year is named for this part number.
Pro Comp’s ES3000 uses a twin tube cellular gas design together with 10-stage velocity-sensitive valving. Damping changes with the speed of the suspension, and the 5/8 inch chrome-hardened piston rod and Teflon rebound stop are there for a comfortable ride on pavement and firm control on rough ground. Double welded mounts add strength, and Pro Comp covers the shock with its limited lifetime warranty. Pro Comp rates the rear position for 0 to 1 in. of lift, so that figure applies to the rear suspension only.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for 0 to 1 in. of lift
- Pro Comp Suspension limited lifetime warranty
Rear shock care
Rear shocks carry the load of the rear axle and cargo, and they control how the back end moves over bumps and through rough terrain. When the bed is loaded, the rear suspension works harder, so damping and mounting points matter for ride control. A rear shock that has lost damping can make the back end feel loose or bouncy.
Keep the rear mounting points clean and check the bushings at every service. Rubber bushings that crack or flatten allow movement that can wear the bracket and shorten the shock’s life. Replacing both rear shocks at once keeps the axle level and the ride consistent.
- Inspect bushings for cracks at each service
- Check the bracket welds and bolts
- Replace both rear shocks together
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321523 |
| UPC | 614901041491 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Make sure your vehicle’s year, model and trim match before ordering, and confirm the shock is going into the rear position it was made for.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 321523.
Not included: the dust boot.











